Re: Configure 3 displays on SLES 9 using nvidia Quadro NVS 440
Thank you for your reply. These are the answer to your questions:
1. We updated to the one before the latest i.e. 2.10 and still the same
2. tried all different combinations (noapic, acpi=off, noapic & acpi=off), but still the same
3. A more recent kernel is at this point not an option as, our environment, being a mission critical, is very static and such changes can not be implemented.
However, we might try just to see if a kernel update would solve the problem, but again this would not be a solution for us.
Novell support says that the problem is using a proprietary nVidia kernel module, thus this cannot be covered by SUSE/Novell support, however they will look if they can find anything else.
<4>nvidia: module not supported by Novell, setting U taint flag.
<4>nvidia: module license 'NVIDIA' taints kernel.
<6>ACPI: PCI interrupt 0000:42:00.0[A] -> GSI 3 (level, low) -> IRQ 3
<7>PCI: Setting latency timer of device 0000:42:00.0 to 64
<4>PCI: Enabling device 0000:43:00.0 (0104 -> 0106)
<6>ACPI: PCI interrupt 0000:43:00.0[A] -> GSI 5 (level, low) -> IRQ 5
<7>PCI: Setting latency timer of device 0000:43:00.0 to 64
<4>NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006
<4>NVRM: RmInitAdapter failed! (0x23:0xffffffff:679)
<4>NVRM: rm_init_adapter(1) failed