nV News Forums - View Single Post

gulizard · 03-02-07, 01:49 PM

Ok I just attempted. The RAM will not do 1T Command Rate atleast at its current timings.

I tried to O/C the system to 2.9GHz. The RAM was O/Ced to 866MHz, I don't know if its the timings, or if its even the RAM not accepting it. When I tried to start I got a long beep, and then it told me to go into my bios and fix what I had changed.

I had to put a 3:2 Divider on the RAM to get it to work. I had the FSB running at 1300MHz. I changed no voltages. Were all stock.

Any advice?

03-02-07, 01:49 PM	#8
gulizard "Powerstroke Diesel" Join Date: Dec 2006 Location: Evansville, Indiana (from Detroit) Posts: 663	Re: Question about O/Cing Ok I just attempted. The RAM will not do 1T Command Rate atleast at its current timings. I tried to O/C the system to 2.9GHz. The RAM was O/Ced to 866MHz, I don't know if its the timings, or if its even the RAM not accepting it. When I tried to start I got a long beep, and then it told me to go into my bios and fix what I had changed. I had to put a 3:2 Divider on the RAM to get it to work. I had the FSB running at 1300MHz. I changed no voltages. Were all stock. Any advice? __________________ my rig: 2011 Ford F250 Lariat, 6.7 Powerstroke, DPF/urea delete H&S Mini Maxx tuned, w/ fuel box from IDP ET 1/8 8.40