View Single Post
Old 03-05-07, 05:55 PM   #1
odl21
Registered User
 
Join Date: Mar 2007
Posts: 6
Default forcedeth 0.50 - can't turn on gbit

hello,

i am running the latest 2.4 kernel (2.4.34) with forcedeth 0.50 compiled into the kernel (i.e. not as a module).

the driver works fine but doesn't appear to support 1000Mb/s.

i include below, the output from ethtool. the card is connected to a linksys gbit switch. i don't see anything in syslog kernel debug such as Gbit detected or whatever.

am i missing something?

# ethtool eth0
Settings for eth0:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 1
Transceiver: external
Auto-negotiation: on
Supports Wake-on: g
Wake-on: d
Link detected: yes
odl21 is offline   Reply With Quote