View Single Post
Old 03-06-07, 11:09 PM   #1
cdhgold
Registered User
 
Join Date: Mar 2007
Posts: 4
Default FC6 3 monitors w/ 2 video cards

I have a dual head nvidia card as my primary device it works correctly supporting my dual monitors. I also have an on-board intel i810 video device. This works also well BY ITSELF. The problem is when I try to use both devices at the same time for 3 monitors only the device set as primary in BIOS works.
Thank you in advance for any help anyone can give
Here is my xorg.conf
-----------------------------------------------------------------------------------------
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Nov 7 10:05:25 PST 2006
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "Screen0" RightOf "Screen1"
Screen 1 "Screen1" 0 0
Screen 2 "Screen2" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
Option "Clone" "on"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "nvidia"
Load "dri"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x1024"
HorizSync 31.5 - 67.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor2"
VendorName "Unknown"
ModelName "Unknown"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "Videocard Vendor"
BoardName "nVidia Corporation NV34 [GeForce FX 5200]"
BusID "PCI:4:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Videocard2"
Driver "i810"
VideoRam 65536
VendorName "Videocard Vendor"
Option "XVideo" "On"
Option "MonitorLayout" "CRT,CRT"
Option "DevicePresence" "On"
BoardName "Intel Corporation 82945G/GZ Integrated Graphics Controller"
BusID "PCI:0:2.0"
Screen 2
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
#Option "TwinView" "True"
#Option "TwinViewOrientation" "LeftOf"
Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
#Option "TwinView" "True"
Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "800x600"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Videocard2"
Monitor "Monitor2"
DefaultDepth 24
#Option "TwinView" "True"
#Option "TwinViewOrientation" "LeftOf"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Here is the error from my xorg.0.log
--------------------------------------------
(WW) I810: No matching Device section for instance (BusID PCI:0:2:0) found
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
Also here is my lspci output
-------------------------------------------
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:02.0 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 01)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
04:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
cdhgold is offline   Reply With Quote