View Single Post
Old 03-19-07, 01:22 PM   #7
Madman81
Registered User
 
Join Date: Feb 2007
Posts: 5
Default Re: no SURROUND SOUND 5.1 @ KUBUNTU 6.10

[17179573.812000] audit: initializing netlink socket (disabled)
[17179573.812000] audit(1174290234.812:1): initialized
[17179573.812000] highmem bounce pool size: 64 pages
[17179573.812000] VFS: Disk quotas dquot_6.5.1
[17179573.812000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.812000] Initializing Cryptographic API
[17179573.812000] io scheduler noop registered
[17179573.812000] io scheduler anticipatory registered
[17179573.812000] io scheduler deadline registered
[17179573.812000] io scheduler cfq registered (default)
[17179573.812000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179573.812000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179573.812000] assign_interrupt_mode Found MSI capability
[17179573.812000] Allocate Port Service[0000:00:0b.0cie00]
[17179573.812000] Allocate Port Service[0000:00:0b.0cie03]
[17179573.812000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[17179573.812000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179573.812000] assign_interrupt_mode Found MSI capability
[17179573.812000] Allocate Port Service[0000:00:0c.0cie00]
[17179573.812000] Allocate Port Service[0000:00:0c.0cie03]
[17179573.812000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179573.812000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179573.812000] assign_interrupt_mode Found MSI capability
[17179573.812000] Allocate Port Service[0000:00:0d.0cie00]
[17179573.812000] Allocate Port Service[0000:00:0d.0cie03]
[17179573.812000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179573.812000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179573.812000] assign_interrupt_mode Found MSI capability
[17179573.812000] Allocate Port Service[0000:00:0e.0cie00]
[17179573.812000] Allocate Port Service[0000:00:0e.0cie03]
[17179573.812000] isapnp: Scanning for PnP cards...
[17179574.168000] isapnp: No Plug & Play device found
[17179574.184000] Real Time Clock Driver v1.12ac
[17179574.184000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179574.184000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.188000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.188000] mice: PS/2 mouse device common for all mice
[17179574.188000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.188000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.188000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.188000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179574.188000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.188000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.188000] EISA: Probing bus 0 at eisa.0
[17179574.188000] Cannot allocate resource for EISA slot 4
[17179574.188000] EISA: Detected 0 cards.
[17179574.188000] TCP bic registered
[17179574.188000] NET: Registered protocol family 1
[17179574.188000] NET: Registered protocol family 8
[17179574.188000] NET: Registered protocol family 20
[17179574.188000] Starting balanced_irq
[17179574.188000] Using IPI No-Shortcut mode
[17179574.188000] ACPI: (supports S0 S1 S3 S4 S5)
[17179574.188000] Freeing unused kernel memory: 308k freed
[17179574.228000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179575.256000] Capability LSM initialized
[17179575.288000] ACPI: Fan [FAN] (on)
[17179575.292000] ACPI: Thermal Zone [THRM] (40 C)
[17179575.648000] SCSI subsystem initialized
[17179575.652000] libata version 1.20 loaded.
[17179575.652000] sata_nv 0000:00:07.0: version 0.8
[17179575.652000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[17179575.652000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
[17179575.652000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[17179575.652000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 217
[17179575.652000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 217
[17179575.856000] ata1: SATA link up 3.0 Gbps (SStatus 123)
[17179576.020000] ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff
[17179576.020000] ata1: dev 0 ATA-7, max UDMA7, 586072368 sectors: LBA48
[17179576.020000] nv_sata: Primary device added
[17179576.020000] nv_sata: Primary device removed
[17179576.020000] nv_sata: Secondary device added
[17179576.020000] nv_sata: Secondary device removed
[17179576.028000] ata1: dev 0 configured for UDMA/133
[17179576.028000] scsi0 : sata_nv
[17179576.232000] ata2: SATA link down (SStatus 0)
[17179576.232000] scsi1 : sata_nv
[17179576.232000] Vendor: ATA Model: SAMSUNG HD300LJ Rev: ZT10
[17179576.232000] Type: Direct-Access ANSI SCSI revision: 05
[17179576.232000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[17179576.232000] NFORCE-CK804: chipset revision 242
[17179576.232000] NFORCE-CK804: not 100% native mode: will probe irqs later
[17179576.232000] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[17179576.232000] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[17179576.232000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
[17179576.232000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
[17179576.232000] Probing IDE interface ide0...
[17179576.244000] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
[17179576.244000] sda: Write Protect is off
[17179576.244000] sda: Mode Sense: 00 3a 00 00
[17179576.244000] SCSI device sda: drive cache: write back
[17179576.244000] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
[17179576.244000] sda: Write Protect is off
[17179576.244000] sda: Mode Sense: 00 3a 00 00
[17179576.244000] SCSI device sda: drive cache: write back
[17179576.244000] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[17179576.336000] sd 0:0:0:0: Attached scsi disk sda
[17179576.520000] hda: SAMSUNG SP1614N, ATA DISK drive
[17179577.192000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179577.204000] Probing IDE interface ide1...
[17179577.944000] hdc: BENQ DVD-ROM 16X, ATAPI CD/DVD-ROM drive
[17179578.728000] hdd: BENQ DVD DUAL DW1610, ATAPI CD/DVD-ROM drive
[17179578.784000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.792000] hda: max request size: 512KiB
[17179578.796000] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[17179578.796000] hda: cache flushes supported
[17179578.796000] hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 >
[17179578.892000] hdc: ATAPI 50X DVD-ROM drive, 512kB Cache
[17179578.892000] Uniform CD-ROM driver Revision: 3.20
[17179578.896000] hdd: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179579.224000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179579.224000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[17179579.224000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 225
[17179579.224000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179579.224000] forcedeth: using HIGHDMA
[17179579.244000] usbcore: registered new driver usbfs
[17179579.244000] usbcore: registered new driver hub
[17179579.248000] ieee1394: Initialized config rom entry `ip1394'
[17179579.252000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179579.748000] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
[17179579.748000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[17179579.748000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233
[17179579.748000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179579.748000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179579.748000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179579.764000] ohci_hcd 0000:00:02.0: irq 233, io mem 0xd2103000
[17179579.820000] usb usb1: configuration #1 chosen from 1 choice
[17179579.820000] hub 1-0:1.0: USB hub found
[17179579.820000] hub 1-0:1.0: 10 ports detected
[17179579.924000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[17179579.924000] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50
[17179579.924000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179579.924000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[17179579.924000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179579.924000] ehci_hcd 0000:00:02.1: debug port 1
[17179579.924000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[17179579.924000] ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000
[17179579.924000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179579.924000] usb usb2: configuration #1 chosen from 1 choice
[17179579.924000] hub 2-0:1.0: USB hub found
[17179579.924000] hub 2-0:1.0: 10 ports detected
[17179580.028000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[17179580.028000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58
[17179580.076000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[d2004000-d20047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[17179580.100000] Attempting manual resume
[17179580.120000] kjournald starting. Commit interval 5 seconds
[17179580.120000] EXT3-fs: mounted filesystem with ordered data mode.
[17179580.272000] ohci_hcd 0000:00:02.0: wakeup
[17179580.656000] usb 1-10: new full speed USB device using ohci_hcd and address 2
[17179580.892000] usb 1-10: configuration #1 chosen from 1 choice
[17179581.348000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000b2e07d]
[17179588.248000] input: PC Speaker as /class/input/input1
[17179588.576000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.580000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.760000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[17179588.760000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[17179588.760000] input: PS2++ Logitech MX Mouse as /class/input/input2
[17179588.892000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
[17179588.892000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 217
[17179588.892000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179588.908000] ts: Compaq touchscreen protocol output
[17179588.932000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179588.944000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
[17179588.944000] usbcore: registered new driver usblp
[17179588.944000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179589.212000] intel8x0_measure_ac97_clock: measured 54684 usecs
[17179589.212000] intel8x0: clocking to 46872
[17179589.340000] lp: driver loaded but no devices found
[17179589.356000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179589.356000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179589.396000] fuse init (API version 7.6)
[17179589.428000] Adding 2104472k swap on /dev/disk/by-uuid/bd07e6f1-2256-4eb2-916b-19c3d460bfcf. Priority:-1 extents:1 across:2104472k
[17179589.588000] EXT3 FS on hda7, internal journal
[17179590.344000] kjournald starting. Commit interval 5 seconds
[17179590.352000] EXT3 FS on hda8, internal journal
[17179590.352000] EXT3-fs: mounted filesystem with ordered data mode.
[17179592.504000] NET: Registered protocol family 17
[17179593.732000] NET: Registered protocol family 10
[17179593.732000] lo: Disabled Privacy Extensions
[17179593.732000] IPv6 over IPv4 tunneling driver
[17179596.596000] ACPI: Power Button (FF) [PWRF]
[17179596.596000] ACPI: Power Button (CM) [PWRB]
[17179596.696000] ibm_acpi: ec object not found
[17179596.728000] pcc_acpi: loading...
[17179597.012000] powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179597.012000] powernow-k8: MP systems not supported by PSB BIOS structure
[17179597.012000] powernow-k8: MP systems not supported by PSB BIOS structure
[17179598.452000] Linux agpgart interface v0.101 (c) Dave Jones
[17179598.516000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179598.520000] [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes.
[17179598.520000] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[17179598.576000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179598.576000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[17179598.716000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179598.716000] apm: disabled - APM is not SMP safe.
[17179601.628000] [fglrx] total GART = 130023424
[17179601.628000] [fglrx] free GART = 114032640
[17179601.628000] [fglrx] max single GART = 114032640
[17179601.628000] [fglrx] total LFB = 268304384
[17179601.628000] [fglrx] free LFB = 250474496
[17179601.628000] [fglrx] max single LFB = 250474496
[17179601.628000] [fglrx] total Inv = 0
[17179601.628000] [fglrx] free Inv = 0
[17179601.628000] [fglrx] max single Inv = 0
[17179601.628000] [fglrx] total TIM = 0
[17179603.068000] Bluetooth: Core ver 2.8
[17179603.068000] NET: Registered protocol family 31
[17179603.068000] Bluetooth: HCI device and connection manager initialized
[17179603.068000] Bluetooth: HCI socket layer initialized
[17179603.096000] Bluetooth: L2CAP ver 2.8
[17179603.096000] Bluetooth: L2CAP socket layer initialized
[17179603.096000] Bluetooth: RFCOMM socket layer initialized
[17179603.096000] Bluetooth: RFCOMM TTY layer initialized
[17179603.096000] Bluetooth: RFCOMM ver 1.7
[17179604.136000] eth0: no IPv6 routers present
[17179650.404000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179650.404000] ISOFS: changing to secondary root
[17218984.328000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17218984.432000] ISO 9660 Extensions: RRIP_1991A



amix
bash: amix: command not found


cat /proc/asound/devices

2: : timer
3: [ 0- 2]: digital audio playback
4: [ 0- 1]: digital audio capture
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0] : control


cat /proc/asound/cards

0 [CK804 ]: NFORCE - NVidia CK804
NVidia CK804 with ALC850 at 0xd2102000, irq 217
Madman81 is offline   Reply With Quote