nV News Forums - View Single Post

Kyle Katarn · 03-19-07, 04:07 PM

WORKAROUND:

Go into the BIOS, and change "Bootup Display" from "Auto-Select" to "Both". Then make sure the VGA cable is connected, and boot as normal. Twinview, Xinerama, etc. will work properly.

03-19-07, 04:07 PM	#18
Kyle Katarn Registered User Join Date: Mar 2007 Posts: 10	Re: CRT Blank With Twinview [420 Go] WORKAROUND: Go into the BIOS, and change "Bootup Display" from "Auto-Select" to "Both". Then make sure the VGA cable is connected, and boot as normal. Twinview, Xinerama, etc. will work properly.