View Single Post
Old 03-25-07, 01:31 AM   #1
misterflibble
Registered User
 
Join Date: Jun 2004
Posts: 23
Question Component Out HDTV modes

I have component-out on my onboard 6150. When I set my TVStandard to 1080i and my Resolution to 1920x1080 in my xorg.conf, everything works fine. I noticed however, that the driver will validate any built in TV resolutions lower than that, such as 1280x720, 720x480, etc. Similarly, setting TVStandard to 720p allows validation of all other TV modes, except 1920x1080. I expected that having these resolutions would allow me to switch from 1080i to 720p with xrandr. However, it just switches from 1920x1080 resolution at 1080i timings to a 1280x720 resolution still at 1080i timings, resulting in a small box drawn on the screen. This can't be the intended behavior, can it? Making a smaller screen resolution at the 1080i timings *would* be useful if I could make it an arbitrary size, say 1920x1000, to eliminate overscan, but these tiny boxes don't seem to be of any use at all. Is this a bug, or a hardware limitation?
misterflibble is offline   Reply With Quote