View Single Post
Old 05-15-03, 11:27 PM   #1
rryjew
Registered User
 
Join Date: May 2003
Posts: 4
Send a message via AIM to rryjew
Unhappy Help. Quake3 won't run over 640x480 on RH8.0

Hi all. I really hope someone can help this Linux noob. I can't get Quake3 to run at a resolution above 640x480. I have installed the latest point release and the latest nvidia driver. I believe the nvidia driver is correctly installed b/c I'm getting >2000 fps on glxgears.

I've got a ASUS GeForce3 installed in RH8.0 box. I've got the 2.4.18-27.8.0 kernel installed.



Thanks in advance.



XF86Config follows

# File generated by anaconda.
#

Section "ServerLayout"
#
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
#Option "XkbOptions" ""
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us" #Option "XkbVariant" ""
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 96.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection

Section "Device"
# no known options
#BusID
Identifier "NVIDIA GeForce 3 (generic)"
Driver "nvidia"
VendorName "NVIDIA GeForce 3 (generic)"
BoardName "NVIDIA GeForce 3 (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 3 (generic)"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection
Attached Files
File Type: log xfree86.0.log (19.2 KB, 169 views)

Last edited by rryjew; 05-15-03 at 11:30 PM.
rryjew is offline   Reply With Quote