View Single Post
Old 04-13-07, 06:41 AM   #5
extensive2
Guest
 
Posts: n/a
Default Re: 2nd NIC is off on Asus M2N-SLI Deluxe (nForce 570 SLI MCP)

I removed the two other NICs, so that there is no remapping being done anymore. Now the system looks like that:
Code:
# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:08.0 VGA compatible controller: ATI Technologies Inc 215CT [Mach64 CT] (rev 09)
07:00.0 PCI bridge: Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (A-Segment Bridge) (rev 09)
07:00.2 PCI bridge: Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (B-Segment Bridge) (rev 09)
08:04.0 SCSI storage controller: Triones Technologies, Inc. Unknown device 2340 (rev 09)
09:04.0 SCSI storage controller: Triones Technologies, Inc. Unknown device 2340 (rev 09)
And I put msi=0 msix=0 in /etc/initramfs-tools/modules ...
Code:
# cat /etc/initramfs-tools/modules
# List of modules that you want to include in your initramfs.
#
# Syntax:  module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.

forcedeth msi=0 msix=0
rr2340
... which however did not improve the situation.

I got lucky once after a cold boot (out of approx. ten tries), to have both NICs working. I'm attaching dmesg output of the occasion when both NICs worked and the same for a "normal" occurence, when only the first NIC was working. Both contain full forcedeth debug output, so maybe (hopefully) that will be sufficient to figure out what is going on.
Attached Files
File Type: gz dmesg-working.gz (22.1 KB, 169 views)
File Type: gz dmesg-nonworking.gz (10.6 KB, 168 views)
  Reply With Quote