View Single Post
Old 06-07-07, 01:14 AM   #14
AaronP
NVIDIA Corporation
 
AaronP's Avatar
 
Join Date: Mar 2005
Posts: 2,487
Default Re: Pleaseeeee, help!, Fiesty, Fawn, vs., nvdia, drivers!

It looks like your flat panel's native resolution is rejected because its vertical refresh rate is over the limit imposed by the EDID:

Code:
(II) NVIDIA(0): Frequency information for Nvidia Default Flat Panel (DFP-0):
(II) NVIDIA(0):   HorizSync   : 29.000-67.000 kHz
(II) NVIDIA(0):   VertRefresh : 0.000-60.000 Hz
(II) NVIDIA(0):     (HorizSync from EDID)
(II) NVIDIA(0):     (VertRefresh from EDID)
(II) NVIDIA(0): 
(II) NVIDIA(0): --- Building ModePool for Nvidia Default Flat Panel (DFP-0)
(II) NVIDIA(0):     ---
(II) NVIDIA(0):   Validating Mode "1680x1050":
(II) NVIDIA(0):     1680 x 1050 @ 61 Hz
(II) NVIDIA(0):     For use as DFP backend.
(II) NVIDIA(0):     Mode Source: EDID
(II) NVIDIA(0):       Pixel Clock      : 121.40 MHz
(II) NVIDIA(0):       HRes, HSyncStart : 1680, 1728
(II) NVIDIA(0):       HSyncEnd, HTotal : 1760, 1840
(II) NVIDIA(0):       VRes, VSyncStart : 1050, 1052
(II) NVIDIA(0):       VSyncEnd, VTotal : 1058, 1080
(II) NVIDIA(0):       H/V Polarity     : -/-
(WW) NVIDIA(0):     Mode is rejected: VertRefresh (61.1 Hz) out of range
(WW) NVIDIA(0):     (0.000-60.000 Hz).
You can override this check with the "NoVertRefreshCheck" ModeValidation option (see the README for details).
AaronP is offline   Reply With Quote