View Single Post
Old 06-09-07, 05:17 PM   #3
robbyt
Registered User
 
Join Date: Jun 2007
Posts: 15
Default Re: crazy colors! 100.14.09 with 8600m on macbook pro

Quote:
Originally Posted by netllama
I have a few questions:
0) Are you able to capture this problem in a screenshot?
1) If you remove 'quiet splash' from your GRUB configuration (and reboot), does that have any impact?
2) Does the problem persist if you disable the Composite extension in xorg.conf ?
3) Is this problem present with the 'nv' X driver as well?

Thanks,
Lonni
0: i'm not sure, since now X seems to be crashing randomly while it's doing this
1: no change
2: I believe it's disabled by default? I wrote my xorg.conf myself and didn't explicitly enabled it.
3: the 'nv' driver doesn't seem to load up for me:

(II) Reloading /usr/lib/xorg/modules//libddc.so
(WW) NV(0): DDC routing table corrupt! DAC 0 -> 1 for port 1
(--) NV(0): I2C map:
(--) NV(0): Bus 1 -> DAC0
(--) NV(0): Bus 1 -> SOR1
(--) NV(0): Bus 2 -> SOR0
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): I2C bus "DDC" removed.
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus 2...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): I2C bus "DDC" removed.
(--) NV(0): Trying load detection on DAC0 ... nothing.
(--) NV(0): Trying load detection on DAC1 ... nothing.
(--) NV(0): Trying load detection on DAC2 ... nothing.
(EE) NV(0): No display devices found
(II) UnloadModule: "nv"
(II) UnloadModule: "ddc"
(II) UnloadModule: "i2c"
(II) UnloadModule: "vm86"
(II) Unloading /usr/lib/xorg/modules//libvm86.so
(II) UnloadModule: "int10"
(EE) Screen(s) found, but none have a usable configuration.
robbyt is offline   Reply With Quote