View Single Post
Old 06-23-07, 11:36 AM   #4
Registered User
Join Date: Jun 2007
Posts: 32
Default Re: Pioneer DFP/ GeForce4 DVI-HDMI Finally got 1080i but doesn't look right...

Hey guys,
I fixed the Modelines in my xorg.conf (they were previously copied and pasted from the other Pioneer post). It turns out that on my first modeline only the last number was off and it was only off by one. I also cleaned up my xorg.conf a bit and changed the modevalidation parameters. I am still getting 1080i, and it looks bad but not quite as bad as in the previous pictures.

Here is what it looks like now: Pic 1 Pic 2

Here is my xorg.conf
here is the important stuff from my xorg.conf:
Section "Monitor"
Identifier "DFP"
VendorName "Pioneer"
#HorizSync 15.0-46.0
HorizSync 45.0
VertRefresh 60.0
#VertRefresh 49.0-61.0
ModeLine "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
ModeLine "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
ModeLine "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync
Option "UseDisplayDevice" "DFP"

Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "nVidia Inc. GeForce4 Ti4400"
# The following line is auto-generated by x11-misc/mkxf86config
Driver "nvidia"
Option "NoLogo" "true"
VideoRam 131072
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"

Section "Screen"
Identifier "Screen0"
Device "nVidia Inc. GeForce4 Ti4400"
Monitor "DFP"
Option "ModeValidation" "NoVertRefreshCheck,NoEdidMaxPClkCheck,NoDFPNative ResolutionCheck"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080" "1920x1080" "1920x1080@60.00" "1360x768@60i"
Here is my nvidia-bug-report.log
Here is my Xorg.0.log
Writher is offline   Reply With Quote