View Single Post
Old 07-02-07, 09:30 AM   #6
SergeK
Registered User
 
Join Date: Jul 2007
Posts: 18
Default Re: 100.14.11 driver hangs the Ubuntu box

The last one finally
-----------------------------

[ 66.670470] Time: tsc clocksource has been installed.
[ 66.670476] hash matches device tty15
[ 66.671215] Freeing unused kernel memory: 328k freed
[ 66.684622] input: AT Translated Set 2 keyboard as /class/input/input1
[ 68.194896] Capability LSM initialized
[ 68.233577] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 68.297886] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 68.301075] ACPI: Thermal Zone [THRM] (30 C)
[ 69.489665] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[ 69.489711] VP_IDE: chipset revision 6
[ 69.489715] VP_IDE: not 100% native mode: will probe irqs later
[ 69.489728] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
[ 69.489743] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaio, hdbio
[ 69.489764] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddio
[ 69.489776] Probing IDE interface ide0...
[ 69.518501] usbcore: registered new interface driver usbfs
[ 69.518552] usbcore: registered new interface driver hub
[ 69.518602] usbcore: registered new device driver usb
[ 69.521673] USB Universal Host Controller Interface driver v3.0
[ 69.571660] SCSI subsystem initialized
[ 69.580382] Fusion MPT base driver 3.04.03
[ 69.580391] Copyright (c) 1999-2007 LSI Logic Corporation
[ 69.590213] Fusion MPT SPI Host driver 3.04.03
[ 69.797476] Floppy drive(s): fd0 is 1.44M
[ 69.871467] FDC 0 is a post-1991 82077
[ 70.137223] Probing IDE interface ide1...
[ 71.001085] hdc: SAMSUNG CDRW/DVD SM-332B, ATAPI CD/DVD-ROM drive
[ 71.672988] ide1 at 0x170-0x177,0x376 on irq 15
[ 71.694156] libata version 2.20 loaded.
[ 71.700567] ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 9 (level, low) -> IRQ 9
[ 71.700600] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 71.701377] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 71.701421] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000c800
[ 71.702607] usb usb1: configuration #1 chosen from 1 choice
[ 71.703177] hub 1-0:1.0: USB hub found
[ 71.703212] hub 1-0:1.0: 2 ports detected
[ 71.733299] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 71.733320] Uniform CD-ROM driver Revision: 3.20
[ 71.805071] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 71.805105] mptbase: Initiating ioc0 bringup
[ 72.292431] ioc0: 53C1030: Capabilities={Initiator}
[ 72.728282] scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=16
[ 73.104702] ACPI: PCI Interrupt 0000:00:0b.1[b] -> GSI 16 (level, low) -> IRQ 17
[ 73.104742] mptbase: Initiating ioc1 bringup
[ 74.639491] ioc1: 53C1030: Capabilities={Initiator}
[ 75.075452] scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=17
[ 75.451988] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 75.452036] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 75.452504] eth0: RTL8169s/8110s at 0xd0846f00, 00:18:4d:79:5d:6f, IRQ 18
[ 76.505828] scsi 1:0:0:0: Direct-Access SEAGATE ST336754LC 0002 PQ: 0 ANSI: 3
[ 76.505870] target1:0:0: Beginning Domain Validation
[ 76.522991] target1:0:0: Ending Domain Validation
[ 76.523058] target1:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 76.525957] scsi 1:0:1:0: Direct-Access SEAGATE ST336753LC DX10 PQ: 0 ANSI: 3
[ 76.525996] target1:0:1: Beginning Domain Validation
[ 76.539626] target1:0:1: Ending Domain Validation
[ 76.539685] target1:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 76.542524] scsi 1:0:2:0: Direct-Access ACER ST336753LC AC02 PQ: 0 ANSI: 3
[ 76.542563] target1:0:2: Beginning Domain Validation
[ 76.556161] target1:0:2: Ending Domain Validation
[ 76.556220] target1:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 76.559063] scsi 1:0:3:0: Direct-Access SEAGATE ST336753LC 0002 PQ: 0 ANSI: 3
[ 76.559104] target1:0:3: Beginning Domain Validation
[ 76.572750] target1:0:3: Ending Domain Validation
[ 76.572811] target1:0:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 76.576555] scsi 1:0:4:0: Direct-Access SEAGATE ST336754LC 0003 PQ: 0 ANSI: 3
[ 76.576596] target1:0:4: Beginning Domain Validation
[ 76.593757] target1:0:4: Ending Domain Validation
[ 76.593836] target1:0:4: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 76.846866] mptbase: ioc1: IOCStatus(0x0047): SCSI Protocol Error
[ 76.884939] scsi 1:0:6:0: Processor ESG-SHV SCA HSBP M14 0.02 PQ: 0 ANSI: 2
[ 76.884979] target1:0:6: Beginning Domain Validation
[ 76.993344] target1:0:6: Ending Domain Validation
[ 76.993419] target1:0:6: asynchronous
[ 76.996278] mptbase: ioc1: IOCStatus(0x0047): SCSI Protocol Error
[ 80.070303] SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
[ 80.077500] sda: Write Protect is off
[ 80.077514] sda: Mode Sense: ab 00 10 08
[ 80.099663] SCSI device sda: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.104705] SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
[ 80.106224] sda: Write Protect is off
[ 80.106229] sda: Mode Sense: ab 00 10 08
[ 80.108101] SCSI device sda: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.108109] sda: sda1 sda2 < sda5 >
[ 80.124777] sd 1:0:0:0: Attached scsi disk sda
[ 80.125596] SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB)
[ 80.126774] sdb: Write Protect is off
[ 80.126779] sdb: Mode Sense: ab 00 10 08
[ 80.128277] SCSI device sdb: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.128856] SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB)
[ 80.130031] sdb: Write Protect is off
[ 80.130036] sdb: Mode Sense: ab 00 10 08
[ 80.131535] SCSI device sdb: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.131541] sdb: sdb1 < sdb5 >
[ 80.141990] sd 1:0:1:0: Attached scsi disk sdb
[ 80.142799] SCSI device sdc: 71687372 512-byte hdwr sectors (36704 MB)
[ 80.143972] sdc: Write Protect is off
[ 80.143977] sdc: Mode Sense: ab 00 10 08
[ 80.145471] SCSI device sdc: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.146021] SCSI device sdc: 71687372 512-byte hdwr sectors (36704 MB)
[ 80.147192] sdc: Write Protect is off
[ 80.147197] sdc: Mode Sense: ab 00 10 08
[ 80.148690] SCSI device sdc: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.148697] sdc: sdc1 < sdc5 >
[ 80.157071] sd 1:0:2:0: Attached scsi disk sdc
[ 80.157881] SCSI device sdd: 71687372 512-byte hdwr sectors (36704 MB)
[ 80.159001] sdd: Write Protect is off
[ 80.159006] sdd: Mode Sense: ab 00 10 08
[ 80.160385] SCSI device sdd: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.160955] SCSI device sdd: 71687372 512-byte hdwr sectors (36704 MB)
[ 80.162070] sdd: Write Protect is off
[ 80.162075] sdd: Mode Sense: ab 00 10 08
[ 80.163456] SCSI device sdd: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.163462] sdd: sdd1 < sdd5 >
[ 80.171489] sd 1:0:3:0: Attached scsi disk sdd
[ 80.178529] SCSI device sde: 71687372 512-byte hdwr sectors (36704 MB)
[ 80.180032] sde: Write Protect is off
[ 80.180040] sde: Mode Sense: ab 00 10 08
[ 80.181946] SCSI device sde: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.182663] SCSI device sde: 71687372 512-byte hdwr sectors (36704 MB)
[ 80.184096] sde: Write Protect is off
[ 80.184100] sde: Mode Sense: ab 00 10 08
[ 80.185968] SCSI device sde: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 80.185975] sde:
[ 80.190066] sd 1:0:4:0: Attached scsi disk sde
[ 80.201278] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 80.201573] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 80.201853] sd 1:0:2:0: Attached scsi generic sg2 type 0
[ 80.202110] sd 1:0:3:0: Attached scsi generic sg3 type 0
[ 80.202370] sd 1:0:4:0: Attached scsi generic sg4 type 0
[ 80.202643] scsi 1:0:6:0: Attached scsi generic sg5 type 3
[ 82.071342] Attempting manual resume
[ 82.071351] swsusp: Resume From Partition 254:2
[ 82.071354] PM: Checking swsusp image.
[ 82.071685] PM: Resume from disk failed.
[ 82.097905] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 82.098279] SGI XFS Quota Management subsystem
[ 82.100388] Filesystem "dm-0": Disabling barriers, not supported by the underlying device
[ 82.100741] XFS mounting filesystem dm-0
[ 82.132957] Starting XFS recovery on filesystem: dm-0 (logdev: internal)
[ 82.288372] Ending XFS recovery on filesystem: dm-0 (logdev: internal)
[ 89.024482] r8169: eth1: link up
[ 89.168289] NET: Registered protocol family 10
[ 89.168501] lo: Disabled Privacy Extensions
[ 92.574455] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 92.579166] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 92.589751] parport_pc: VIA 686A/8231 detected
[ 92.589760] parport_pc: probing current configuration
[ 92.589781] parport_pc: Current parallel port base: 0x378
[ 92.589859] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 92.684678] parport_pc: VIA parallel port: io=0x378, irq=7
[ 92.730783] input: PC Speaker as /class/input/input2
[ 92.962647] Linux agpgart interface v0.102 (c) Dave Jones
[ 92.966594] agpgart: Detected VIA Apollo Pro 133 chipset
[ 92.967323] agpgart: AGP aperture is 4M @ 0xe0000000
[ 93.597594] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 94.414926] nvidia: module license 'NVIDIA' taints kernel.
[ 94.950437] ACPI: PCI Interrupt 0000:00:07.5[C] -> GSI 10 (level, low) -> IRQ 10
[ 94.950601] PCI: Setting latency timer of device 0000:00:07.5 to 64
[ 95.481883] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 95.482473] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007
[ 95.683176] lp0: using parport0 (interrupt-driven).
[ 95.962029] Filesystem "dm-0": Disabling barriers, not supported by the underlying device
[ 96.829290] kjournald starting. Commit interval 5 seconds
[ 96.829531] EXT3 FS on sda1, internal journal
[ 96.829541] EXT3-fs: mounted filesystem with ordered data mode.
[ 96.833966] Filesystem "dm-1": Disabling barriers, not supported by the underlying device
[ 96.841110] XFS mounting filesystem dm-1
[ 96.899996] Ending clean XFS mount for filesystem: dm-1
[ 96.944066] Adding 1048568k swap on /dev/mapper/ubox-swap. Priority:-1 extents:1 across:1048568k
[ 99.292578] input: Power Button (FF) as /class/input/input4
[ 99.301009] ACPI: Power Button (FF) [PWRF]
[ 99.366157] input: Power Button (CM) as /class/input/input5
[ 99.366628] ACPI: Power Button (CM) [PWRB]
[ 99.402143] input: Sleep Button (CM) as /class/input/input6
[ 99.402616] ACPI: Sleep Button (CM) [SLPB]
[ 99.545037] No dock devices found.
[ 99.593595] Using specific hotkey driver
[ 99.625975] eth1: no IPv6 routers present
[ 99.697458] ibm_acpi: ec object not found
[ 99.911509] pcc_acpi: loading...
[ 111.803764] ppdev: user-space parallel port driver
[ 112.663190] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 112.663202] apm: overridden by ACPI.
____________________________________________

Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)
____________________________________________

Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)
____________________________________________

xset -q:

____________________________________________

nvidia-settings -q all:

____________________________________________

End of NVIDIA bug report log file.


Sorry again for long posts here
SergeK is offline   Reply With Quote