View Single Post
Old 07-03-07, 07:29 PM   #5
Registered User
Join Date: May 2005
Posts: 345
Send a message via MSN to kam03
Default Re: Need help with OC...

Originally Posted by Saintster
Since we have close to the same set up i was giving you my set ups in the bios. I had the same problem and adjusting these settings helped. Although it may have just been the fsb and the bump in v core that kept it stable. Here's my settings
DDR2/DDR3 overvoltage 0.2
PCI-e overvoltage 0.1
fdb ov 0.1
(G) MC overvoltage control 0.1
v core 1.45
Maybe just go with the fsb bump and see what happens. I'm thinking the pci-e overvoltage is to keep those devices stable when large fsb increases come into play. I'm not positive though. Good Luck
Thanks, i understand now. I tried v core on 1.45 v but it fails ortos on about 3 hours.

I have left the memory over-voltage to normal and all other settings same as yours.

I'll increase the memory voltage if i still get the same problem. Would i need to increase the memory? my memory is running at a lower speed of 768mhz instead of 800mhz. I guess i might need to since the fsb has increased?

i7 3770K @ 4.5ghz, Asus P8Z77-V,
8GB 1866Mhz CL9,
Gigabyte 7950,
Crucial M4 128GB,
Seagate 3TB,
Enermax Galaxy 1000W DXX,
Windows 7 Ultimate x64,
Yamaha RX-V667 Receiver,
Monitor Audio Vector 5.1
kam03 is offline   Reply With Quote