View Single Post
Old 07-15-07, 01:47 PM   #1
schmolch
Registered User
 
Join Date: Feb 2004
Posts: 18
Default Can't get xinerama working (getting clone mode)

Hi,

im using twinview at the moment and it works fine.
I will add a third monitor soon though and i want to check if xinerama works.

I looked at other configs and obviously i don't know whats wrong.

Xorg always starts in Clone mode even though i explicitly disabled it.

Here is my xorg.conf:

# nvidia-xconfig: X conf
#iguration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Jun 13 18:39:30 PDT 2007


Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
Screen 1 "Screen1"
Screen 1 "Screen1" RightOf "Screen0"

Option "Xinerama" "on"
Option "Clone" "off"

InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
#InputDevice "stylus" "SendCoreEvents"
#InputDevice "eraser" "SendCoreEvents"
#InputDevice "cursor" "SendCoreEvents"
#InputDevice "pad"
EndSection

Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
#Load "dri"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "true"
EndSection

Section "InputDevice"

# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection


Section "InputDevice"
Option "Mode" "absolute"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/event2" #USB ONLY
Option "Type" "stylus"
Option "USB" "on" #USB ONLY
# Option "Speed" "1"
#Option "CursorProx" "10"
#Option "mmonitor" "off"
Option "ScreenNo" "0"
Option "Twinview" "horizontal"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/event2" #USB ONLY
Option "Type" "eraser"
Option "USB" "on" #USB ONLY
Option "Mode" "absolute"
# Option "Speed" "0.2"
#Option "CursorProx" "10"
#Option "mmonitor" "off"
Option "ScreenNo" "0"
Option "Twinview" "horizontal"
EndSection


Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/event2" #USB ONLY
Option "Type" "cursor"
Option "Mode" "absolute"
Option "USB" "on" #USB ONLY
# Option "Speed" "0.2"
#Option "CursorProx" "10"
#Option "mmonitor" "off"
Option "ScreenNo" "0"
Option "Twinview" "horizontal"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "pad"
Option "Device" "/dev/input/event2"
Option "Type" "pad"
Option "USB" "on"
Option "Mode" "absolute"
#Option "CursorProx" "10"
#Option "mmonitor" "off"
Option "ScreenNo" "0"
Option "Twinview" "horizontal"
EndSection



Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "Rotate" "Right"
Option "NoLogo" "True"
BusID "PCI:0:5:0"
#Option "Coolbits" "1"
#Option "CursorShadow" "1"
Screen 0
#Option "ConnectedMonitor" "DFP"
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "Rotate" "Right"
BusID "PCI:0:5:0"
Option "NoLogo" "True"
#Option "Coolbits" "1"
#Option "CursorShadow" "1"
Screen 1
#Option "ConnectedMonitor" "VGA"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
#Option "TwinView" "True"
#Option "TwinViewOrientation" "above"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
#Option "TwinView" "True"
#Option "TwinViewOrientation" "above"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
EndSection


If you need any further information about the Hard or Software plz let me know.
schmolch is offline   Reply With Quote