View Single Post
Old 07-22-07, 09:03 AM   #1
mistercool
Registered User
 
Join Date: Jan 2005
Posts: 5
Default low resolution on twinview DFP-0 under 100.14.11

Hi all;
I'm running two Samsung SyncMaster 204B's on an FX 5700LE;
on Fedora 6 using drivers from livna repository.

Both monitors work fine at 1600x1200 (giving virtual 3200x1200) using the
9762 driver (kernel 2.6.20-1.2952). Ugrading to the 100.14.11 driver (w/ kernel
2.6.20-1.2962) only turns on one monitor (CRT-0). Running nvidia-settings
shows the DFP-0 as off; trying to turn it on only gives me an option of 1280x1024
resolution! The only clue in the log is that it says
Virtual screen size determined to be 1600 x 1200
instead of 3200 x 1200, but no clues as to _why_.

I tried grabbing the edid.bin while under 9762 and using it under 100.14.11, but
that didn't help: nvidia-setting's "Flat Panel Information" shows everything as Unknown,
but the log doesn't give any error messages about the edid.

I'm stumped.

I've attached the conf, and logs under each driver.
Thanks;
Attached Files
File Type: gz xorg.conf.gz (931 Bytes, 82 views)
File Type: gz Xorg.0.log-9762.gz (4.1 KB, 83 views)
File Type: gz Xorg.0.log-100.14.11.gz (4.1 KB, 71 views)
mistercool is offline   Reply With Quote