View Single Post
Old 08-08-07, 10:24 AM   #2
CaptNKILL
CUBE
 
CaptNKILL's Avatar
 
Join Date: Jan 2003
Location: PA, USA
Posts: 18,844
Default Re: Having some issues...

Hmm... this is interesting:
http://www.ocztechnology.com/product..._ready_edition

That shows my ram as needing 2.3V. That would make sense, but I wonder why other sites say it only needs 2.1.

Its strange, if I change the memory speed (the divider\multiplier) at all in the BIOS, my system auto reboots a few times and resets the memory speed. The only way I can get any change in speed (higher or lower) to work is to set my DDR voltage to +0.5.

Also, I can't seem to get my timings to set right either.
__________________
---- Primary Rig ---- CoolerMaster 690 II Advance - Gigabyte GA-EP45-UD3P - Intel Core 2 Quad Q9550 @ 4.0Ghz + Thermalright Ultra 120 Extreme
6GB DDR2 @ 942Mhz 5-5-5-20 1.9v (2x1Gb Wintec AMPX PC2-8500 & 2x2Gb G.Skill PC2-6400) - EVGA Geforce GTX 470 @ 750/1500/1850 (1.050v)
Sparkle Geforce GTS 250 1Gb Low-Profile (Physx) - Crucial RealSSD C300 64Gb SSD - Seagate 7200.12 500Gb SATA - Seagate 7200.10 320Gb SATA
ASUS VW266H 25.5" LCD - OCZ GameXStream 700W PSU - ASUS Xonar DX - Logitech Z-5500 5.1 Surround - Windows 7 Professional x64
---- HTPC ---- Asus M3A78-EM 780G - AMD Athlon X2 5050e 45W @ 2.6Ghz - 2x2GB Kingston PC2-6400 DDR2 - Sparkle 350W PSU
Seagate 7200.10 320Gb SATA - Seagate 7200.10 250Gb SATA - Athenatech A100BB.350 MicroATX Desktop - Creative X-Fi XtremeMusic
CaptNKILL is offline   Reply With Quote