View Single Post
Old 08-08-07, 11:07 AM   #11
CaptNKILL's Avatar
Join Date: Jan 2003
Location: PA, USA
Posts: 18,844
Default Re: Having some issues...

Running at 450x8 again. With the ram set to 900. Latencies and voltage set to what OCZ recommends (5-5-5-15 and 2.3V). CPUZ still shows the latencies to be off a bit (5-6-6-17) but its not a big deal.

CPU vcore is set to 1.506 in the bios. Under load it's sitting around 1.44.

Been running Orthos blend for a half hour now. CPU temp is fluctuating between 55C and 59C. Not bad considering it's really damn hot in my room.

When I have more time I might try flipping my fans around a bit to get some fresh outside air straight into my CPU heatsink. Not sure what it'll do, but it wouldn't be too hard to try.
---- Primary Rig ---- CoolerMaster 690 II Advance - Gigabyte GA-EP45-UD3P - Intel Core 2 Quad Q9550 @ 4.0Ghz + Thermalright Ultra 120 Extreme
6GB DDR2 @ 942Mhz 5-5-5-20 1.9v (2x1Gb Wintec AMPX PC2-8500 & 2x2Gb G.Skill PC2-6400) - EVGA Geforce GTX 470 @ 750/1500/1850 (1.050v)
Sparkle Geforce GTS 250 1Gb Low-Profile (Physx) - Crucial RealSSD C300 64Gb SSD - Seagate 7200.12 500Gb SATA - Seagate 7200.10 320Gb SATA
ASUS VW266H 25.5" LCD - OCZ GameXStream 700W PSU - ASUS Xonar DX - Logitech Z-5500 5.1 Surround - Windows 7 Professional x64
---- HTPC ---- Asus M3A78-EM 780G - AMD Athlon X2 5050e 45W @ 2.6Ghz - 2x2GB Kingston PC2-6400 DDR2 - Sparkle 350W PSU
Seagate 7200.10 320Gb SATA - Seagate 7200.10 250Gb SATA - Athenatech A100BB.350 MicroATX Desktop - Creative X-Fi XtremeMusic
CaptNKILL is offline   Reply With Quote