View Single Post
Old 06-01-03, 06:52 PM   #7
rogerli
Registered User
 
Join Date: May 2003
Posts: 9
Default

Hi bwkaz,

Thanks a lot for your suggestions.

(1) To Fix the problem, "From man 7 signal, signal 4 is SIGILL, which gets sent when a process tries to execute an invalid instruction for the current CPU", do I need to reintall X?

(2) I changed the word "leftOf" to "LeftOf". Here is my current XF86Config-4:


# File generated by anaconda.

Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0"
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:7100"

EndSection

Section "Module"
# Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
# Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbVariant" "basic"
#Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-95
VertRefresh 50-160
Option "dpms"

# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor1 Vendor"
ModelName "Monitor1 Model"
HorizSync 30-95
VertRefresh 50-160
Option "dpms"
EndSection

Section "Device"
Identifier "nvidia0"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 2 (generic)"
Screen 0
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "nvidia1"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 2 (generic)"
Screen 1
BusID "PCI:0:9:0:
EndSection
Section "Screen"
Identifier "Screen0"
Device "nvidia0"
Monitor "Monitor0"
DefaultDepth 16

Subsection "Display"
Depth 16
Modes "1280x1024"
EndSubsection
EndSection
Section "Screen"
Identifier "Screen1"
Device "nvidia1"
Monitor "Monitor1"
DefaultDepth 16

Subsection "Display"
Depth 16
Modes "640x480"
EndSubsection
EndSection

Section "DRI"
Mode 0666
EndSection


But I still got the same problem. Please look my XFree86.0.log.

Thanks again.
Attached Files
File Type: log xfree86.0.log (18.8 KB, 143 views)
rogerli is offline   Reply With Quote