View Single Post
Old 08-21-07, 12:49 PM   #12
Harvey Pooka
Registered User
Join Date: Jan 2004
Posts: 53
Default Re: Console corrupted when X is started

Originally Posted by zander
Have you tried the 100.14.11 driver release?
I finally tried the 100.14.11 release. The monitor no longer shows the out-of-sync message. It now goes to sleep when I switch to a console.

# sysctl hw.nvidia
hw.nvidia.agp.card.rates: 8x 4x
hw.nvidia.agp.card.fw: supported
hw.nvidia.agp.card.sba: supported
hw.nvidia.agp.card.registers: 0xff000e1b:0x1f000302
hw.nvidia.agp.status.status: enabled
hw.nvidia.agp.status.driver: nvidia
hw.nvidia.agp.status.rate: 8x
hw.nvidia.agp.status.fw: disabled
hw.nvidia.agp.status.sba: enabled
hw.nvidia.version: NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 15:15:08 PDT 2007
hw.nvidia.registry.EnableVia4x: 0
hw.nvidia.registry.EnableALiAGP: 0
hw.nvidia.registry.NvAGP: 1
hw.nvidia.registry.EnableAGPSBA: 0
hw.nvidia.registry.EnableAGPFW: 0
hw.nvidia.registry.SoftEDIDs: 1
hw.nvidia.registry.Mobile: 4294967295
hw.nvidia.registry.ResmanDebugLevel: 4294967295
hw.nvidia.registry.FlatPanelMode: 0
hw.nvidia.registry.DevicesConnected: 0
hw.nvidia.registry.RmLogonRC: 1
hw.nvidia.registry.DetectPrimaryVga: 1
hw.nvidia.registry.dwords: GeForce 6800 16 AGP

# pciconf -lv
nvidia0@pci1:0:0: class=0x030000 card=0x00000000 chip=0x004110de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GeForce 6800 [NV40.1]'
class = display
subclass = VGA

Portion of Xorg.0.log:
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "RandRRotation" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6800 (NV40) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS:
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6800 at PCI:1:0:0:
(--) NVIDIA(0): Sony SDM-M81 (DFP-0)
(--) NVIDIA(0): Sony SDM-M81 (DFP-0): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): Sony SDM-M81 (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (90, 89); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(**) NVIDIA(0): Option "BackingStore" "True"
(**) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
Harvey Pooka is offline   Reply With Quote