View Single Post
Old 11-03-07, 05:11 AM   #14
mythy
Single Male
 
mythy's Avatar
 
Join Date: Dec 2004
Posts: 2,118
Default Re: Is Q6600 @ 3.0ghz w/stock cooler possible?

Quote:
Originally Posted by DiscipleDOC
What are your bios settings?

fsb = setto 333
mem = adjust ratio to 1-1 to start
CPU multiplier = leave stock
Mem timing settings = settoauto
CMD =wtfis this?!?!

Advanced Mem settings:
AUTO!!!


Enhanced C1 (C1E) = OFF!!!!
Exec. Disable Bit = doesnt matter
Virtualization Technology = v
Enhanced Intel Speedstep Technology = OFF!!!
LDT Frequency = WTF IS THIS?!?!

VOLTAGE:?
Vcore = depends on boards Vdrop try 1.35(safe noraml voltage)
Memory = STOCK
1.2 HT = STOCK
NB Core = STOCK
SB Core = STOCK
CPU VTT Core = STOCK
DDR2 Termination volts = STOCK
3.3v = ?
5v = ?
12v = ?

DDR2 Controller Ref volt = auto
DDR2 Channel A Ref volt = auto
DDR2 Channel B Ref volt = auto

Nvidia GPU EX = Enabled
SLI Ready Memory = Disabled


there you go I filled it in for you. that will get you started at 3GHz after that just upp the FSB thats all. Add cpu voltage if needed nothing else needs adjusting
__________________

---Q6600 @3.45 430FSB - P5K Deluxe---
---1066 5-4-4-12 PL6! - 257 GTX OCed---
---ASUS Xonar DX - Dell 2407 24 LCD---
mythy is offline   Reply With Quote