View Single Post
Old 11-17-07, 12:50 AM   #22
levander
Registered User
 
Join Date: Nov 2007
Posts: 28
Default Re: SVideo works fine, Component gives no video at all

Well, after Googling for quite awhile, I found two 720x480 modelines, which the web pages claim are NTSC valid. Here's the relevant parts of xorg.conf for the changes. Where I got the modes from are in the comments:

Code:
Section "Monitor"
	Identifier	"Television" # currently, the S-Video In port on the SyncMaster 215TW
	Modeline 	"720x480gtf"  26.72  720 736 808 896  480 481 484 497  -HSync +Vsync
	# from the bottom of http://www.realh.ukfsn.org/tvhowto/ar01s08.html
	ModeLine 	"720x480ukfsn"  27.5  720 744 800 872  480 483 485 525 	
	# from https://scifi.homelinux.net/mediawiki/index.php/MythTV
	Mode "720x480"
		# D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
		DotClock 34.564
		HTimings 720 752 840 928
		VTimings 480 484 488 504
		Flags	"-HSync" "-VSync"
	EndMode
#	HorizSync	30-50
#	VertRefresh	60
EndSection
The stuff in Xorg.0.log is the same as it was last time.

Still black and white on the component input.

When I tried a modeline, I did change its name to 720x480.
levander is offline   Reply With Quote