View Single Post
Old 11-17-07, 07:47 AM   #5
mckechan
Registered User
 
Join Date: Nov 2007
Posts: 5
Default Re: nearly cloned to TV but not quite

I have tried a few things but it is still not working. I switched of clone and put the screen to the TV to 'right of' but this isn't what I want. It means the screens are split. In terms of the size of the screen it seemed better when I was using clone

Anyway the main problem is still with the flicker and lack of colour. I tried nvidia-xconfig --dynamic-twinview but that didn't seem to change anything.

I realise these whiny forum posts are annoying but I have tried so many xorg.confs over the last week that I would really appreciated it if someone could take a look at my xorg.conf and make some direct suggestions.

Many thanks

current xorg.conf:
Quote:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Oct 4 10:34:46 PDT 2007

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Oct 4 10:33:51 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 65.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "NEC MultiSync 75F"
HorizSync 31.0 - 70.0
VertRefresh 55.0 - 120.0
EndSection

Section "Device"
Identifier "NVIDIA GeForce 7600GT"
Driver "nvidia"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
BusID "PCI:3:0:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7600GT"
Monitor "Generic Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT: 1280x1024_60 +0+0, TV: 640x480_60 +1280+0; CRT: 800x600 +0+0, TV: 640x480_60 +800+0; CRT: 640x480 +0+0, TV: 640x480_60 +640+0"
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection
mckechan is offline   Reply With Quote