View Single Post
Old 12-18-07, 05:58 PM   #7
$n][pErMan
III%
 
$n][pErMan's Avatar
 
Join Date: Nov 2004
Location: Ohio
Posts: 3,726
Send a message via AIM to $n][pErMan
Default Re: Veteran OC'er needs some advice!

Quote:
Originally Posted by mullet
$n][pErMan, you will have to get above the 400 fsb range to keep the NB from over working to hard, once you go to 401 to 450 or higher the timings on the NB are more relaxed where it will be more stable on that motherboard BUT I think your memory is what will hold you back. If you had 8500 memory this would not be an issue you could easily his hit 425x8@3.4 or 475x7@3.3.


Below you can see the difference between the 400 & 401 fsb and how the timings on the NB become more relaxed. Then you can see the performance gain as you move up on the FSB. All of these benchmarks were made with my P5B Deluxe.

400 x 8 1:1 @ 1600 FSB / Mem was @ 800Mhz Vcore 1.375 @ 3.2 - Idle-34c Load-54 (orthos)
SiSoftware - MEM = 7259/7285
SiSoftware - CPU = 29380/20477

PCmark05 - 7421

401 x 8 1:1 @ 1604 FSB / Mem was @ 802Mhz Vcore 1.375 @ 3.2 - Idle-34c Load-54 (orthos)
SiSoftware - MEM = 6761/6769
SiSoftware - CPU = 29463/20523

PCmark05 - 7380

425 x 8 1:1 @ 1700 FSB / Mem was @ 850Mhz Vcore 1.425 @ 3.4 - Idle-36c Load-58 (orthos)
SiSoftware - MEM = 7172/7196
SiSoftware - CPU = 31203/21777
PCmark05 - 7595

450 x 8 1:1 @ 1800 FSB / Mem was @ 900Mhz Vcore 1.55 @ 3.6 - Idle-40c Load-71 (orthos)
SiSoftware - MEM = 7365/7385
SiSoftware - CPU = 33188/22560
PCmark05 - 7893

475 x 7 1:1 @ 1900 FSB / Mem was @ 950Mhz Vcore 1.425 @ 3.3 - Idle-36c Load-58 (orthos)
SiSoftware - MEM = 7814/7828
SiSoftware - CPU = 30532/21296
PCmark05 - 8528
Hmmm... well I tried both 401Mhz and 410Mhz, both at 8x Multiplier and 7x Multiplier and my system would not post by jumping up past the bad zone either How much voltage should I give my North Bridge and FSB Termination voltage??... right now both are at Auto and I have no idea what they read... I dont want to go frying my chipset or anything by manually setting them to high. Just trying to rule things out.... perhaps I just hit my max
__________________
Intel® Core 2 Quad Q6600 G0 @ 3.51GHz (390 x 9 / 1.39v) | ASUS P5B Deluxe/WiFi-AP LGA 775 Intel P965 (1236 BIOS) | OCZ GOLD 8GB (2GB x 4) DDR2 PC2-8500 Dual Channel (4-4-4-12 780Mhz/1.95V 1:1 Ratio) | EVGA GeForce GTX 770 DUAL SuperClocked 4GB (Currently @ 1240MHz Core / 7112MHz Memory) | Sound Blaster X-Fi Fatal1ty FPS | Zalman CNPS9700 LED Ultra Quiet CPU Cooler | Samsung SSD 840 Series 256GB | ASUS ProArt 24in Widescreen LED 1920 x 1200 | Samsung DVD-RW-DL 18x Burner w/ lightscribe| SILVERSTONE OP650 ATX12V / EPS12V 650W Power Supply | AOpen 5.1 Surround sound system | Windows 7 Pro x64
100% Orthos Stable!
$n][pErMan is offline   Reply With Quote