View Single Post
Old 05-12-08, 01:01 PM   #8
grey_1
Guest
 
Posts: n/a
Default Re: Overclocking E6300 browser shuts down

Orthos is a good one.

Choose the small FFTs to stress cpu, or blend for cpu+ram. If your hardware is tight it should run no problem, but a bad stick of ram or anythng wrong really, will cause orthos to halt and give you an error message.

Warning though, this will stress your cpu to near max, so if you don't have good cooling, heat may be a concern.

Coretemp is a good temp monitor. Always good to keep an eye on it. If you see temps going over 60c while stressing, I would suggest stopping orthos.
  Reply With Quote