View Single Post
Old 05-28-08, 06:57 AM   #19
newls1
Registered User
 
newls1's Avatar
 
Join Date: Dec 2004
Posts: 596
Default Re: Overclocking My FX-55 For the first Time

Quote:
Originally Posted by RuM1975
Hi - does anyone still follow this thread?? I am insterested in any info people can give me as I have the San Diego core 90nm. I am struggling to get this chop to 3Ghz with water cooling.

Full specs are as follows and would seriously appreciate any help... Thanks

Case: Thermaltake Soprano VB1000SNS
PSU: X-Power 400 Watt - 20/24 pin-12v-4 pin-Pci-E 6pin
Cooling: Water cooled, 2 x 120mm (front and rear)

Mobo: Epox 9NDA3I nForce3 (POWER BIOS for "easy" overclocking, haha)
Proc: AMD FX-55 San Diego Core 90nm (Driver: AMDK8.SYS)

Mem: Corsair 1GB (2x512) PC3200 (200Mhz) CMX512-3200XML
(Cas#Lat:2, RAS# to CAS#: 2, RAS#2, TRAS:5)

Graphics: ATI Radeon 9600 series
OS: Windows XP SP3 with all updates.

No knows problems, system very stable with air and water.
I highly doubt your Epox motherboard will net a good OC. For a 3Ghz goal (which will be VERY hard to get) you need the BEST s939 mobo for its generation, and that would be HANDS DOWN the DFI NF4 SLi-DR motherboard . Using bios 704-2bt and some TCCD ram, Your chp will be the only limit.
__________________
ASUS P5Q-PRO @ 408FSB / Q6700 @ 3.71GHz AIR COOLED / eVGA GTX295 @ 725c*1585s*2400mem / 4GB G.SKILL PC8500 @ DDR1025 / AUDIGY4 / WD640GB / WD80GB / 28" Hanns-G 3ms LCD
newls1 is offline   Reply With Quote