View Single Post
Old 06-07-08, 05:50 AM   #22
Join Date: Jul 2002
Location: Newcastle, United Kingdom
Posts: 5,138
Send a message via AIM to Dazz
Default Re: QX9650 overclocking?

Originally Posted by David power View Post
I am a little confused.

My cpu is at 1.2v and I am clocked at 3500MHz (10.5 x 333)

This seems find. my pc boots and runs cool, is this voltage too low and as a result I am not seeing the full effect of 3500MHz ?

Can some one explain for me? like, should I increase the vcore?

P5E3 mobo.


OK, I went into my BIOS and i set the VCore to 1.25 but it doesnt show up in cpu-z. when i set it to 1.30 it shows up as 1.256 and when its working on something like orthos it goes to 1.232.

Can someone explain this to me.


Ok so I have my cpu at 3676 at a 333.9 X 11 overclock, my vcore is 1.224 but i think i have it set to 1.250 in the bios.

It plays UT3 and crysis with out BSODing.
I am not 100% sure myself i have conflict of information from the BIOS and CPU-Z.
"Never interupt your enemy when he is making a mistake."

Processor: AMD Phenom II X6 1090T Black Edition @ 4.25GHz
Motherboard: Gigabyte GA-990FXA-UD3
Graphics: ASUS ENGTX470
Memory: 4GB Kingston HyperX Blu PC12800 DDR3
Monitor: LG E2260V-PN Full HD WLED 22" & DELL 20" 2005FPW,
Power: Coolermaster Silent Pro Modular 850w PSU
Sound: Logitech Z5500 Digital.
Cooling: Thermalright Silver Arrow.
1st Storage: Kingston V100 SSDNow128GB SSD
2nd Storage: Samsung Spinpoint F1 750GB
Dazz is offline   Reply With Quote