View Single Post
Old 06-14-08, 12:21 AM   #136
jpkotta
Registered User
 
Join Date: Jun 2008
Posts: 1
Default Re: 169.07 Ubuntu 7.10 Fan at %100

I'm running (K)Ubuntu 8.04 amd64. I usually just use the drivers from the repos unless something is wrong. In this case, the fan is wrong. I didn't have this problem in (X)Ubuntu 7.10, so I found the driver version from that release and installed it and the fan is OK again. I could change the fan speed with nvclock, but it's obviously much better for it to change itself. It seems like it's not changing Performance Level out of maximum (is this the same as PowerMizer?).

Code:
[jpkotta@gauss][~][0]
$ sudo nvclock -i 
-- General info --
Card: 		nVidia Geforce 7900GS
Architecture: 	NV49/G71 A2
PCI id: 	0x292
GPU clock: 	468.000 MHz
Bustype: 	PCI-Express

-- Pipeline info --
Pixel units: 5x4 (110111b)
Vertex units: 7x1 (01111111b)
HW masked units: pixel 100010b vertex 00000000b
SW masked units: pixel 001000b vertex 10000000b

-- Memory info --
Amount: 	256 MB
Type: 		256 bit DDR3
Clock: 		661.500 MHz

-- PCI-Express info --
Current Rate: 	16X
Maximum rate: 	16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: 63C
Fanspeed: 19.9%

-- VideoBios information --
Version: 05.71.22.42.04
Signon message: GeForce 7900 GT VGA BIOS
Performance level 0: gpu 450(+20)MHz/memory 660MHz/1.20V/20%
Performance level 1: gpu 500(+20)MHz/memory 690MHz/1.20V/100%
VID mask: 1
Voltage level 0: 1.20V, VID: 1
I've tried 173.14.05 (doesn't work), 169.12.? (doesn't work), and 100.14.19 (works).
jpkotta is offline   Reply With Quote