nV News Forums - View Single Post - nvnet + RH + 2.4.22-rc1 = trouble

Censo · 08-09-03, 03:10 AM

I have RH 9.0 with new kernel - 2.4.22-rc1.
Nvnet module is compiled and installed without errors, but network card dosn't work at all. Neither with static IP, nor with DHCP. It doesn't see neighbour computers. Even all pings are lost.
The same nvnet driver compiled for kernel 2.4.20-8 (with the same kernel config) works fine (sometimes it freezes a system for a few seconds but it works).
No log messages, no warnings, no errors. I've checked everything several times, it was done in a right way.
Interface is up and running, but according to ifconfig output there are no received packets, only TX.
Any suggestions?

08-09-03, 03:10 AM	#1
Censo Registered User Join Date: Aug 2003 Location: Russia Posts: 3	nvnet + RH + 2.4.22-rc1 = trouble I have RH 9.0 with new kernel - 2.4.22-rc1. Nvnet module is compiled and installed without errors, but network card dosn't work at all. Neither with static IP, nor with DHCP. It doesn't see neighbour computers. Even all pings are lost. The same nvnet driver compiled for kernel 2.4.20-8 (with the same kernel config) works fine (sometimes it freezes a system for a few seconds but it works). No log messages, no warnings, no errors. I've checked everything several times, it was done in a right way. Interface is up and running, but according to ifconfig output there are no received packets, only TX. Any suggestions?