View Single Post
Old 09-15-02, 04:05 AM   #4
Posts: n/a
Default Thanks

Ok. I followed the guide, deviating in a couple places:

First of all the suggested alias:
alias eth0 mcpeth
is nuts. nvnet works just fine for me. Different board maker or something? anyhow, not a problem

Second, the sound. There we have wierdness. The i810_audio driver is supposed to work on its own? Does the nvidia sound driver replace it in some way? My /etc/modules.conf is like this:
[Colin@localhost Colin]$ cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias sound-slot-1 i810_audio
post-install sound-slot-1 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-1 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias usb-controller usb-ohci
alias eth0 nvnet
alias char-major-195 NVdriver

I have commented out the two wierd sound lines to no avail. I later added the char-major-195 line, which gave me a microphone loopback, and a hiss suggesting the headphones were on, but no sound.

Any thoughts? I will be troubleshooting this with the local linux guys ( 6667 #orlug) and I will report back if I find something.

Edit some futher info from dmsg:

hdc: DMA disabled
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
PCI: Setting latency timer of device 00:04.0 to 64
Intel 810 + AC97 Audio, version 0.05, 14:22:43 Sep 14 2002
PCI: Setting latency timer of device 00:06.0 to 64
i810: NVIDIA NFORCE AUDIO found at IO 0xe400 and 0xe000, IRQ 11
ac97_codec: AC97 Audio codec, id: 0x4144:0x5360 (Analog Devices AD1885)
nvaudio: setting clocking to 3600000
nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2960 Tue May 14 07:41:42 PDT 2002
Linux agpgart interface v0.99 (c) Jeff Hartmann

Is it using the nforce ones anyway? Can they be
'nutered' to use the 810's without affecting the lan drivers?
  Reply With Quote