View Single Post
Old 03-09-09, 06:57 AM   #8
Registered User
Jon's Avatar
Join Date: Nov 2002
Posts: 560
Default Re: Q6600 almost got 3.2ghz but need help with voltage

I set the voltage to 1.3750 in the bios which gives me 1.33v idle and 1.312v under full load (prime95). At 3.2ghz it ran through 4 hours of prime95 without an error then an 8 hour DOW2 gaming session without a problem! Thanks for the help. I'll stick at 3.2ghz for a bit... maybe in a couple of months I'll get bored again and try 3.4!
Intel i5-2500K (4Ghz)|2 x Nvidia 560GTX TI (880/2100mhz)|Crucial M4 SSD
12GB GSkill PC3-12800 (1600Mhz 9-9-9-24)|Thermaltake Tough Power 700w|Razer Megalodon 7.1 Headset
BENQ XL2410T 24" 3D Monitor
Jon is offline   Reply With Quote