Thread: :(
View Single Post
Old 04-18-09, 04:16 PM   #24
silverstonec2d
Registered User
 
Join Date: May 2007
Posts: 11
Default Re: :(

I think you only option you can change is the "host burn-in mode percentage", that's how my old intel mobo was. The screenshots you posted showed this option with a value of 0 meaning no overclock. You can only go up a certain percentage, but i'm not sure what that number is. Also, you'll have to manually lower your ram speed down from 800 down to 533mhz before you start as the ram and cpu speed will both increase as you raise the "burn in percentage". For example with these settings, if you can do a 10% adjustment, your cpu will run at 2.64ghz and ram will be at 586mhz I'm not sure if you cannot adjust voltage or not for the cpu, so that may limit your percentage as well. Don't forget to do some stability tests if you do get the OC going. Hope this helps
__________________
Corsair Obsidian 800D (Custom WC'd)
Corsair AX1200i
APC SMT1500 UPS
Asus Rampage IV Extreme
Intel Core i7 3930K @ 4.5Ghz
32GB G.SKILL Ripjaws Z @ 2133
Sapphire Radeon HD 6990
Creative X-Fi Titanium HD
LG GGW-H20L BD Burner
OCZ RevoDrive 3 240GB
Corsair Force GTs 180GB RAID 0
VisionTek Killer 2100 NIC
Dell U2711
silverstonec2d is offline   Reply With Quote