View Single Post
Old 05-07-09, 03:40 PM   #11
seth_keith
Registered User
 
Join Date: May 2009
Posts: 19
Default Re: mplayer-svn w/ VDPAU playing 1080p on 8200 based motherboard (m3n78-vm)

Upon further investigation, there are no videos I can find that do play without vdpau and do not play with vdpau ( withe the 185 beta release of the NV drivers ). With the 180.51 there are a few, and with the previous release 180.44 there were even more. All videos listed below failed with 180.44.

I am not building my own mplayer-svn, so I don't know what is going on with the version number. It should be MPlayer SVN 29140 and FFmpeg SVN 18331. Since there are currently no videos listed that fail on only vdpau no bugs are reported, but anyone know what is going on with sunshine or journey to the edge of the universe?

Here is the full report:

With the NV 180.51-x86_64 drivers

plays:

blade running final cut
speed racer
troy

NOT PLAYING:

Tinkerbell.

With no vdpau it plays:

mplayer-svn -noconfig all /mnt/rfs/video/Tinkerbell.ts -frames 1
MPlayer UNKNOWN-4.4.0 (C) 2000-2009 MPlayer Team

Playing /mnt/rfs/video/Tinkerbell.ts.
TS file format detected.
VIDEO H264(pid=4113) AUDIO A52(pid=4353) NO SUBS (yet)! PROGRAM N. 1
FPS seems to be: 23.976025
================================================== ========================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
================================================== ========================
================================================== ========================
Opening audio decoder: [liba52] AC3 decoding with liba52
No accelerated IMDCT transform found
AUDIO: 48000 Hz, 2 ch, floatle, 640.0 kbit/20.83% (ratio: 80000->384000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
================================================== ========================
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
Starting playback...
VDec: vo config request - 1920 x 1080 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vdpau] 1920x1080 => 1920x1080 Planar YV12
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
A: 600.2 V: 600.2 A-V: 0.017 ct: -0.003 5/ 5 ??% ??% ??,?% 0 0


With VDPAU I get a black screen with the correct audio. There is the output of the first frame

Playing /mnt/rfs/video/Tinkerbell.ts.
TS file format detected.
VIDEO H264(pid=4113) AUDIO A52(pid=4353) NO SUBS (yet)! PROGRAM N. 1
FPS seems to be: 23.976025
================================================== ========================
Forced video codec: ffmpeg12vdpau
Forced video codec: ffh264vdpau
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
[VD_FFMPEG] XVMC-accelerated MPEG-2.
Selected video codec: [ffh264vdpau] vfm: ffmpeg (FFmpeg H.264 (VDPAU))
================================================== ========================
================================================== ========================
Opening audio decoder: [liba52] AC3 decoding with liba52
No accelerated IMDCT transform found
AUDIO: 48000 Hz, 2 ch, floatle, 640.0 kbit/20.83% (ratio: 80000->384000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
================================================== ========================
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
Starting playback...
[VD_FFMPEG] XVMC-accelerated MPEG-2.
VDec: vo config request - 1920 x 1080 (preferred colorspace: H.264 VDPAU acceleration)
VDec: using H.264 VDPAU acceleration as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vdpau] 1920x1080 => 1920x1080 H.264 VDPAU acceleration
[vdpau] Error when calling vdp_video_surface_create: The system does not have enough resources to complete the requested operation at this time.
[vdpau] no surfaces available in get_image
vf_get_image: Tried to allocate a format that can not be allocated!
[h264_vdpau @ 0x7ffb09495cc0]get_buffer() failed (-1 0 0 (nil))
[h264_vdpau @ 0x7ffb09495cc0]decode_slice_header error
[vdpau] Failed VDPAU decoder rendering: An invalid handle value was provided.
[vdpau] Error when calling vdp_video_surface_create: The system does not have enough resources to complete the requested operation at this time.
[vdpau] no surfaces available in get_image
vf_get_image: Tried to allocate a format that can not be allocated!
[h264_vdpau @ 0x7ffb09495cc0]get_buffer() failed (-1 0 0 (nil))
[h264_vdpau @ 0x7ffb09495cc0]decode_slice_header error
[vdpau] Failed VDPAU decoder rendering: An invalid handle value was provided.
[vdpau] Error when calling vdp_video_surface_create: The system does not have enough resources to complete the requested operation at this time.
[vdpau] no surfaces available in get_image
vf_get_image: Tried to allocate a format that can not be allocated!
[h264_vdpau @ 0x7ffb09495cc0]get_buffer() failed (-1 0 0 (nil))
[h264_vdpau @ 0x7ffb09495cc0]decode_slice_header error
[vdpau] Failed VDPAU decoder rendering: An invalid handle value was provided.
[vdpau] Error when calling vdp_video_surface_create: The system does not have enough resources to complete the requested operation at this time.
[vdpau] no surfaces available in get_image
vf_get_image: Tried to allocate a format that can not be allocated!
[h264_vdpau @ 0x7ffb09495cc0]get_buffer() failed (-1 0 0 (nil))
[h264_vdpau @ 0x7ffb09495cc0]decode_slice_header error
[vdpau] Failed VDPAU decoder rendering: An invalid handle value was provided.
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
A: 600.2 V: 600.2 A-V: 0.004 ct: -0.003 5/ 5 ??% ??% ??,?% 0 0
[vdpau] Error when calling vdp_video_surface_destroy: An invalid handle value was provided.
[vdpau] Error when calling vdp_video_surface_destroy: An invalid handle value was provided.
[vdpau] Error when calling vdp_video_surface_destroy: An invalid handle value was provided.
[vdpau] Error when calling vdp_video_surface_destroy: An invalid handle value was provided.


------- check next post for the rest
seth_keith is offline   Reply With Quote