View Single Post
Old 08-10-09, 03:02 PM   #6
TheBigOne
Taking over the universe
 
TheBigOne's Avatar
 
Join Date: Dec 2007
Location: Chicago
Posts: 283
Default Re: P45 Overclocking Help

I would removed 2gb of that ram first and put a fan on the chipset to cool it, I know that board is able to hit 3.8ghz stable, I use to own that board
If you want to just hit 3Ghz change CPU Clock Ratio to x9
Try this

Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: auto
CPU Clock Ratio ..........................: 12
Fine CPU Clock Ratio.....................:0.5
CPU Frequency ...........................: 3.33


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: enabled
CPU Host Frequency (Mhz) ............:266
PCI Express Frequency (Mhz) .........:100

C.I.A.2 .................................:disabled

***Advanced Clock Control
CPU Clock Drive...........................:800mv
PCI Express Clock Drive.................:800mv
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)...................:0ps

DRAM Performance Control
Performance Enhance...................:standard
Extreme Memory Profile (X.M.P.).....:auto
(G)MCH Frequency Latch...............:266mhz
System Memory Multiplier ..............: 3.00a
Memory Frequency (Mhz) ..............: 800mhz
DRAM Timing Selectable ................:auto

***Standard Timing Control
CAS Latency Time........................:5
tRCD .........................................:4
tRP'...........................................:4
tRAS..........................................:12

***Advanced Timing Control
tRRD...........................................:3
tWTR..........................................:3
tWR............................................:10
tRFC...........................................:52
tRTP...........................................:3
Command Rate (CMD) ....................:0

Driving Strength Profiles
Driving Strength ............................:auto

***Channel A
Static tRead Value.........................:5
tRD Phase0 Adjustment...................:0
tRD Phase1 Adjustment...................:0
tRD Phase2 Adjustment .................:0
tRD Phase3 Adjustment..................:0
Trd2rd(Different Rank)....................: 6
Twr2wr(Different Rank)...................: 6
Twr2rd(Different Rank)...................: 5
Trd2wr(Same/Diff Rank)..................: 8
Dimm1 Clock Skew Control...............:auto
Dimm2 Clock Skew Control...............:auto

***Channel B
Static tRead Value.........................:5
tRD Phase0 Adjustment...................:0
tRD Phase1 Adjustment...................:0
tRD Phase2 Adjustment .................:0
tRD Phase3 Adjustment..................:0
Trd2rd(Different Rank)....................: 6
Twr2wr(Different Rank)...................: 6
Twr2rd(Different Rank)...................: 5
Trd2wr(Same/Diff Rank)..................: 8
Dimm1 Clock Skew Control...............:auto
Dimm2 Clock Skew Control...............:auto

Motherboard Voltage Control
Load Line Calibration.....................Enabled
Voltage Type.………... Normal
CPU
CPU Vcore….……….........................:1.35v
CPU Termination…..... 1.200V*.......:1.200
CPU PLL…………………....1.500V*.......:1.550-auto
CPU Referen.…………....0.755V*.......: 0.805-auto
CPU Reference2………,,0.800V*.......: 0.760-auto

MCH/ICH
MCH Core…………….....1.100V...........:1.25V
MCH Reference….…….0.800V...........:0.760-auto
MCH/DRAM Ref.…......0.900V...........:-----
ICH I/O……………….....1.500V............:1.550-auto
ICH Core…………...……1.100V............:1.100-auto

DRAM
DRAM Voltage ……....1.800V............: 2.1v
DRAM Termination .…0.900V............:---
Channel A Reference 0.900V............:---
Channel B Reference 0.900V............:---

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: -------
Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: --------
__________________
Quote:
Originally Posted by Mr Bigman
I battle this universe for 6.5 billion people, i don't need to babysit.
Main System
Asus P6T, Intel I7 965 extreme 3.2 ghz
12gb CORSAIR DDR3 1600
2X 256gb Samsung SSD Raid 0, 1x 1.5tb seagate
2x XFX 4890 Crossfire
Visiontek 650 TvTuner, Sound X-Fi Titanium Fata1ity
LG GBW-H20L Blu-ray, Samsung SH-S203N DVD-RW
OCZ ProXStream 1000w, Case Coolermaster HAF 932
swifttech 655 pump, Apogee GTZ Ci7, MCR220-QP,
ek-fc4890 x2 video waterblocks Antec vers elite disply
Sunbeam 4ch 20w fan controller

Mediacenter
MSI K9A2 Platinum, AMD 9950 X4 Phenom
8gb dominator 1066MHZ
2x500gb Western digital raid 0, 2x1tb Western digtal
1x EVGA 250 videocard
hauppuage 1600 TV Tuner, Creative X-FI
LG GBW-H20L Blu-ray, Silverstone 650w PSU
Netgear wifi a/b/g/n card
TheBigOne is offline   Reply With Quote