View Single Post
Old 04-08-10, 09:03 AM   #17
Registered User
Join Date: Jul 2005
Location: Munich
Posts: 910
Default Re: Quadview possibe? (Quadro NVS 420)

Originally Posted by Xevious View Post
This isn't very optimum as when I am running in single output mode (BIOS post and what not) I am only seeing half the screen.
I had a similar problem: with the default EDID settings, the TH2G splits the BIOS/post
screen to the three attached LCDs, so that each LCDs shows 1/3 of the screen.
Means: the output was pretty distorted. The solution was to delete the wide screen
EDID and just keep the single LCD EDID flashed (i.e. 1680x1050 for me). This way
the signal is only generated on one output (which in your case should be 1920x1200
scaled up, I assume).

Originally Posted by Xevious View Post
I took some pictures of my setup here if anyone is curious:
Impressive! Glad you got it finally working.

Originally Posted by Xevious View Post
I have to admit that it feels soo much nicer at 41 Hz though. Before it felt like there was input lag when dragging my mouse and now games are actually playable at the full resolution. Running. I definitely noticed an immediate difference in just everyday use of the monitor.
Plus you could now use eye-candy like compiz if you like :-)


JaXXoN is offline   Reply With Quote