Originally Posted by ATOJAR
Ok something weird about turbo mode, Its in the bios when the multiplier is set to auto but as soon as i manually input any figure the turbo mode option goes!
Also if i try the x19 multiplier my two closes memory options are 1335MHz or 1779MHz!
Something's wrong there. If your Base Clock is at 200mhz and your memory multiplier is at 8x that should give you 1600mhz, regardless of the CPU multiplier.
I'm not familiar with the P6T BIOS so I don't know about Turbo modes relation to the manual multiplier setting.
Originally Posted by Toss3
Naw my room temps were below 20c yesterday.
Got it running stable(10runs of intel's burn test) at 1.45V and 4200Mhz. Idles at around 40c and max temps are somewhere between 70-80c.
Damn dude that's a lot of volts
My CPU load temp is about 58c. The graphics card were idling at 24c last night, 43 under load
. Godda love this WC!