View Single Post
Old 04-26-10, 05:21 PM   #2
schmolch
Registered User
 
Join Date: Feb 2004
Posts: 18
Default Re: cannot start from onboard gpu anymore

I learned that the freeze only occurs with my xorg.conf.
I have been using this config for about a year now though.
Now Xorg doesnt seem to like it anymore.
Can anyone see something wrong with my xorg.conf ?
Code:

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "ServerFlags"
Option "Xinerama" "1"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "NEC LCD2070NX"
HorizSync 31.0 - 92.0
VertRefresh 56.0 - 85.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "NEC LCD2070NX"
HorizSync 31.0 - 92.0
VertRefresh 56.0 - 85.0
EndSection

Section "Device"
Identifier "Device0"
# Driver "nouveau"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7050 PV / nForce 630a"
BusID "PCI:0:18:0"
Option "Randrrotation" "True"
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"

# Driver "nouveau"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
BusID "PCI:2:0:0"
Option "Randrrotation" "True"
Screen 0
EndSection


Section "Device"
Identifier "Device2"
Driver "nvidia"
# Driver "nouveau"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
BusID "PCI:2:0:0"
Option "Randrrotation" "True"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
Option "Rotate" "CCW"
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor2"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
Option "Rotate" "CCW"
EndSection


Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-2: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
Option "Rotate" "CCW"
EndSection
schmolch is offline   Reply With Quote