View Single Post
Old 06-19-10, 05:21 PM   #19
LurkerLito
Registered User
 
Join Date: Aug 2004
Posts: 1,550
Default Re: If you own an EVGA 470, and want a high flow bracket...

Quote:
Originally Posted by Bman212121 View Post
+1



So what ever happened to DIY anyway. 10 seconds with a dremel and I can do the same thing...

If you really wanted to be hardcore then why don't you just take the damn bracket off completely.
Because a dremel will void the warranty while this one won't. EVGA is pretty good about letting you do stuff like change the thermal paste and any third party mods. But if you need to RMA the card for any reason you have to put it back as close to factory as it came with no physical damage caused by you. Until EVGA says the warranty is valid after adjusting the back plate with a dremel, I wouldn't do it.
__________________

Main PC: Asus P8Z77-V Deluxe ; Intel i7-3770k ; GSkill Ripjaws X Series 16GB DDR3 2133 (2x8GB) ; Seasonic X Series X-1050 PSU ; Corsair H100 ; EVGA GTX-670 ; Mushkin 240GB SSD system drive
Old PC: ABIT IP35 Pro ; Intel Core2 Quad Q6600 ; Patriot 6GB (3x2GB) DDR2 800 RAM ; EVGA GTX480 SC ; Antec P190 Case ; EnzoTech Ultra120 CPU Cooler
LurkerLito is offline   Reply With Quote