View Single Post
Old 11-06-03, 04:12 PM   #4
edsko
Registered User
 
Join Date: Nov 2003
Posts: 2
Default Dump from ksymoops

As requested, here is the dump from ksymoops. To get this dump, I did

modprove nvnet (no probs here)
ifconfig eth0 (ip) (netmask) (broadcast)

The ifconfig resulted in the crash. Immediately after that I ran ksymoops on the relevant part of the kernel log.

ksymoops 2.4.9 on i686 2.4.20. Options used
-v /usr/src/linux/vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.20/ (default)
-m /boot/System.map (default)

Unable to handle kernel paging request at virtual address c86ba0c8
c804c00f
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c804c00f>] Tainted: P
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: c86ba0c8 ebx: c7570800 ecx: 00000000 edx: c73eb390
esi: c02ac214 edi: c73eb3dc ebp: c02ac1a0 esp: c7171e90
ds: 0018 es: 0018 ss: 0018
Process ifconfig (pid: 86, stackpage=c7171000)
Stack: c73eb3dc c02ac214 c02ac1a0 c7171eb0 c7570800 c73eb390 00000000 c804c000
c01ee337 c7570800 c73eb390 c73eb32c c02ac5dc c73eb368 c7570800 c73eb390
c0212e6a c7570800 c02ac1a0 00000000 c776cbe0 c7570800 bffffce0 c73eb310
Call Trace: [<c01ee337>] [<c0212e6a>] [<c0213320>] [<c0213ba1>] [<c0215957>]
[<c01e4d36>] [<c013c4e6>] [<c01086e7>]
Code: 00 00 00 00 00 05 00 00 00 57 00 00 00 00 00 00 00 94 20 05


>>EIP; c804c00f <_end+7d5cceb/7d5cd3c> <=====

>>ebx; c7570800 <_end+72814dc/7d5cd3c>
>>edx; c73eb390 <_end+70fc06c/7d5cd3c>
>>esi; c02ac214 <arp_tbl+74/1b4>
>>edi; c73eb3dc <_end+70fc0b8/7d5cd3c>
>>ebp; c02ac1a0 <arp_tbl+0/1b4>
>>esp; c7171e90 <_end+6e82b6c/7d5cd3c>

Trace; c01ee337 <neigh_parms_alloc+5f/b4>
Trace; c0212e6a <inetdev_init+96/128>
Trace; c0213320 <inet_set_ifa+50/bc>
Trace; c0213ba1 <devinet_ioctl+4f5/6e8>
Trace; c0215957 <inet_ioctl+1a3/1ec>
Trace; c01e4d36 <sock_ioctl+1e/24>
Trace; c013c4e6 <sys_ioctl+16a/184>
Trace; c01086e7 <system_call+33/38>

Code; c804c00f <_end+7d5cceb/7d5cd3c>
00000000 <_EIP>:
Code; c804c00f <_end+7d5cceb/7d5cd3c> <=====
0: 00 00 add %al,(%eax) <=====
Code; c804c011 <_end+7d5cced/7d5cd3c>
2: 00 00 add %al,(%eax)
Code; c804c013 <_end+7d5ccef/7d5cd3c>
4: 00 05 00 00 00 57 add %al,0x57000000
Code; c804c019 <_end+7d5ccf5/7d5cd3c>
a: 00 00 add %al,(%eax)
Code; c804c01b <_end+7d5ccf7/7d5cd3c>
c: 00 00 add %al,(%eax)
Code; c804c01d <_end+7d5ccf9/7d5cd3c>
e: 00 00 add %al,(%eax)
Code; c804c01f <_end+7d5ccfb/7d5cd3c>
10: 00 94 20 05 00 00 00 add %dl,0x5(%eax,1)

Hope this helps.

Edsko

PS. I don't have ACPI enabled in the kernel, so that cannot be the problem. Thanks for the tip though.
edsko is offline   Reply With Quote