View Single Post
Old 08-25-10, 01:56 AM   #1
henning276
Registered User
 
Join Date: Aug 2010
Posts: 3
Default Twinview Geforce 9500GT

Hi,

I have an issue with my PC.
The system (Debian Sid , Kernel 2.6.34 , KDE 4.4 )
Installed is a Nvidia Geforce 9500GT silent with 1 x DVI , 1 HDMI , 1 VGA
Attached are 2 identical Samsung TFT's GW2233
It's setup to use Twinview and that works quite well. The problem is that the TFT attached via HDMI is periodically blanking. In an irregular manor, so sometimes every minute and sometimes every 2 to 3 minutes. It just goes blank (black) and after a splitsecond it comes back.
The temperature on the GPU is indicated to be ~ 55 to max 70 Degree C

Various changes to the xorg.conf did not change anything.

Quote

# /etc/X11/xorg.conf (Xorg X Window System server configuration file)
#
# This file was generated by fll_xorgconfig, the F.U.L.L.S.T.O.R.Y.
# Xorg Configuration tool.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder58) Fri Mar 12 02:13:46 PST 2010

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
# InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "Mouse0" "CorePointer"
# Option "Xinerama" "0"
EndSection

Section "InputDevice"
# generated from default
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
# Identifier "Keyboard0"
# Driver "kbd"
EndSection

Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
ModeLine "800x600" 68.180 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "640x480" 43.160 640 680 744 848 480 481 484 509 -hsync +vsync
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
Option "Coolbits" "1"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "false"
#BusID "PCI:1:0:0"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9500 GT"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "DFP-0: 1680x1050 +0+0, DFP-1: nvidia-auto-select +1680+0; DFP-0: 800x600 +0+0, DFP-1: nvidia-auto-select +800+0; DFP-0: 640x480 +0+0, DFP-1: nvidia-auto-select +640+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Unquote


Any clue what might be the problem ?

Tks
Henning


PS attached the bug report
Attached Files
File Type: gz nvidia-bug-report.log.gz (70.4 KB, 83 views)

Last edited by henning276; 08-26-10 at 06:18 PM.
henning276 is offline   Reply With Quote