View Single Post
Old 10-29-10, 05:47 AM   #3
dcn
Registered User
 
Join Date: Oct 2010
Posts: 4
Default Re: Nvidia graphic adapter not detected by driver on Sony Vaio VPCZ12M9E

Quote:
Originally Posted by AaronP View Post
The log file from the X server shows that it thinks the Intel chip is the primary one. You could try adding a
BusID "PCI:1:0:0"
line to the Device section in xorg.conf to make it use the correct device.
Hi AaronP,

Many thanks for your support.
However your solution did not make it.

[ 320.748] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 320.748] (==) NVIDIA(0): RGB weight 888
[ 320.748] (==) NVIDIA(0): Default visual is TrueColor
[ 320.748] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 320.748] (**) NVIDIA(0): Enabling RENDER acceleration
[ 320.748] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 320.749] (II) NVIDIA(0): enabled.
[ 320.763] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
[ 320.763] (EE) NVIDIA(0): Please check your system's kernel log for additional error
[ 320.763] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 320.763] (EE) NVIDIA(0): README for additional information.
[ 320.763] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 320.763] (II) UnloadModule: "nvidia"
[ 320.763] (II) UnloadModule: "wfb"
[ 320.763] (II) UnloadModule: "fb"
[ 320.763] (EE) Screen(s) found, but none have a usable configuration.
[ 320.763]
Fatal server error:
[ 320.763] no screens found
[ 320.763]


Dmesg showed also something interesting:

[ 15.126864] nvidia: module license 'NVIDIA' taints kernel.
[ 15.126868] Disabling lock debugging due to kernel taint
[ 15.440457] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 15.440500] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 15.440507] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 15.440517] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.440530] nvidia 0000:01:00.0: setting latency timer to 64
[ 15.440537] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=nonew ns=none
[ 15.440725] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 Fri Oct 8 11:17:08 PDT 2010
[...]
[ 262.090031] NVRM: failed to copy vbios to system memory.
[ 262.091469] NVRM: RmInitAdapter failed! (0x30:0xffffffff:820)
[ 262.091477] NVRM: rm_init_adapter(0) failed
[ 293.884736] NVRM: failed to copy vbios to system memory.
[ 293.885771] NVRM: RmInitAdapter failed! (0x30:0xffffffff:820)
[ 293.885777] NVRM: rm_init_adapter(0) failed
[ 320.178954] NVRM: failed to copy vbios to system memory.
[ 320.181424] NVRM: RmInitAdapter failed! (0x30:0xffffffff:820)
[ 320.181435] NVRM: rm_init_adapter(0) failed
dcn is offline   Reply With Quote