nV News Forums - View Single Post

mojoman0 · 12-05-10, 06:44 PM

oh my bad Vcore in bios is 1.35 not 1.5, in cpuz 1.312. I think I'll go back and try to get the fsb to 1600 or so with low cpu multi and focus on the HT and NB voltages. I found quick boot was somehow disabled so I enabled and it got rid of the mem test.

Currently idle at 2.9ghz Everest gives me 55C cpu, but each individual core at 43
Full load with occt got to mid 60's. Will try dropping cpu voltage

edit:
just made it into windows at 1570, blue screened first so had to bump NB up a bit. Will try to creep higher to 1600

Now at:
Vcore: 1.31
HT: 1.42
NB: 1.36
SB: auto

12-05-10, 06:44 PM	#8
mojoman0 Registered User Join Date: Mar 2006 Location: California Posts: 3,566	Re: Help me get to 3.0 GHz! oh my bad Vcore in bios is 1.35 not 1.5, in cpuz 1.312. I think I'll go back and try to get the fsb to 1600 or so with low cpu multi and focus on the HT and NB voltages. I found quick boot was somehow disabled so I enabled and it got rid of the mem test. Currently idle at 2.9ghz Everest gives me 55C cpu, but each individual core at 43 Full load with occt got to mid 60's. Will try dropping cpu voltage edit: just made it into windows at 1570, blue screened first so had to bump NB up a bit. Will try to creep higher to 1600 Now at: Vcore: 1.31 HT: 1.42 NB: 1.36 SB: auto