Those of you that follow the blog should remember the 3D Vision stereoscopic 3D test system
with water cooling that I've built. In the meantime I've been upgrading the test PC a bit by bit, but since it is based on a bit older platform already I decided to do some testing with the recently announced Intel Sandy Bridge platform. The 3D test computer currently used an Asus P55 Sabertooth motherboard together with an Intel Core i5 750 processor overclocked to run at 4 GHz 24/7, together with dual GeForce GTX 580 video cards in SLI setup. So I've got two more recent high-end motherboards from Asus for testing that are based on the new platform and use the P67 chipset ' Asus P67 Sabertooth and the P67 Maximus IV Extreme and an Intel Core i5 2500K processor with unlocked multiplier (for overclocking of course). The goal of this test is to reach five gigahertz by overclocking the processor and measure the performance of the new Intel Sandy Bridge platform versus the older one that I'm currently using. As you can expect the tests would be related to gaming in stereo 3D mode and comparing the framerates with both platforms and the different motherboards to see if the upgrade is worth it or not.
With all of the above said, I should also mention that currently upgrading to a Sandy Bridge platform may not be the best choice, considering that not long ago Intel has officially announced a bug in the chipset that can potentially cause SATA 2 performance degradation over time. As a result of that announcement there was a big recall of potentially affected motherboards, but that is not something that can stop an enthusiast, especially when there is still some time before the motherboards using the revised chipset can be available on the market again. So even if you get an Intel Sandy Bridge motherboard now, you can avoid using the affected SATA 2 ports and get it replaced when the revised versions become available on the market in march/april. But as an enthusiast I'm not willing to wait for a few months for the revised chipsets, so I prefer to get the platform now and test it and if needs replacing the warranty can cover that when the revised models are available later this year. So stay tuned for some results of the tests soonâ?¦ ;)
Related posts you might be interested in: