View Single Post
Old 03-01-11, 06:22 AM   #5
donuhr
Registered User
 
Join Date: Feb 2011
Posts: 5
Default Re: notebook Asus: the valid display devices are 'CRT-0'

I create EDID hex file for my monitor in windows and past it in xorg.conf:
Code:
Option   "CustomEDID" "CRT-0:/etc/X11/asus.bin"
In this case result in xorg.log is
Quote:
[ 2564.112] (**) NVIDIA(0): Option "CustomEDID" "CRT-0:/etc/X11/asus.bin"
[ 2564.325] (II) NVIDIA(GPU-0): Display (AUO (CRT-0)) does not support NVIDIA 3D Vision
[ 2564.326] (II) NVIDIA(GPU-0): stereo.
[ 2564.328] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
[ 2564.328] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 2564.328] (--) NVIDIA(0): VideoBIOS: 70.18.64.00.0a
[ 2564.328] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2564.328] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 2564.328] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:1:0:0
[ 2564.328] (--) NVIDIA(0): AUO (CRT-0)
[ 2564.328] (--) NVIDIA(0): AUO (CRT-0): 400.0 MHz maximum pixel clock
[ 2564.337] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 2564.337] (==) NVIDIA(0):.
[ 2564.337] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 2564.337] (==) NVIDIA(0): will be used as the requested mode.
[ 2564.337] (==) NVIDIA(0):.
[ 2564.337] (II) NVIDIA(0): Validated modes:
[ 2564.337] (II) NVIDIA(0): "nvidia-auto-select"
[ 2564.337] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 2564.339] (--) NVIDIA(0): DPI set to (102, 102); computed from "UseEdidDpi" X config
[ 2564.339] (--) NVIDIA(0): option
[ 2564.339] (--) Depth 24 pixmap format is 32 bpp
[ 2564.339] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 2564.345] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
And i also have black screen.
donuhr is offline   Reply With Quote