View Single Post
Old 04-23-11, 03:47 PM   #2
gert
Registered User
 
Join Date: Oct 2004
Posts: 2
Default Re: [270.26] suspend -> resume, mutter crashs.

same issue ctrl + alt + f1 works fine after resume gnome shell completely mest up.
gtx8800 sli
driver 270.41.06
xorg 1.10.1 (11001000)
Linux 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 GNU/Linux

Code:
[    2.099406] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[    2.099496] hub 7-0:1.0: USB hub found
[    2.099500] hub 7-0:1.0: 2 ports detected
[    2.099546] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.099553] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.099556] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.099583] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    2.099622] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[    2.099712] hub 8-0:1.0: USB hub found
[    2.099719] hub 8-0:1.0: 2 ports detected
[    2.099798] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.100159] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.100165] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.100246] mousedev: PS/2 mouse device common for all mice
[    2.100330] rtc_cmos 00:04: RTC can wake from S4
[    2.108965] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.108996] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.109072] device-mapper: uevent: version 1.0.3
[    2.109130] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    2.109177] device-mapper: multipath: version 1.2.0 loaded
[    2.109181] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.109397] cpuidle: using governor ladder
[    2.109609] cpuidle: using governor menu
[    2.109808] TCP cubic registered
[    2.109898] NET: Registered protocol family 10
[    2.110324] NET: Registered protocol family 17
[    2.110336] Registering the dns_resolver key type
[    2.112396] PM: Hibernation image not present or could not be loaded.
[    2.112402] registered taskstats version 1
[    2.112658]   Magic number: 7:692:41
[    2.112664] bdi 7:6: hash matches
[    2.112839] rtc_cmos 00:04: setting system clock to 2011-04-23 19:01:22 UTC (1303585282)
[    2.112848] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.112853] EDD information not available.
[    2.114447] Freeing unused kernel memory: 956k freed
[    2.114669] Write protecting the kernel read-only data: 10240k
[    2.116156] Freeing unused kernel memory: 184k freed
[    2.120766] Freeing unused kernel memory: 1444k freed
[    2.140135] <30>udev[87]: starting version 167
[    2.166639] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.166664] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.166702] r8169 0000:03:00.0: setting latency timer to 64
[    2.166754] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[    2.167119] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xffffc90000c6a000, 00:22:68:61:17:25, XID 1c4000c0 IRQ 41
[    2.172517] ahci 0000:00:1f.2: version 3.0
[    2.172526] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.172559] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    2.172590] ahci: SSS flag set, parallel bus scan disabled
[    2.172628] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.172633] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems 
[    2.172638] ahci 0000:00:1f.2: setting latency timer to 64
[    2.299814] scsi0 : ahci
[    2.300224] scsi1 : ahci
[    2.300534] scsi2 : ahci
[    2.300822] scsi3 : ahci
[    2.301163] scsi4 : ahci
[    2.301552] scsi5 : ahci
[    2.301755] ata1: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc100 irq 42
[    2.301765] ata2: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc180 irq 42
[    2.301769] ata3: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc200 irq 42
[    2.301774] ata4: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc280 irq 42
[    2.301778] ata5: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc300 irq 42
[    2.301782] ata6: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc380 irq 42
[    2.648986] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.652666] ata1.00: ATA-6: WDC WD740GD-00FLA0, 21.08U21, max UDMA/133
[    2.652675] ata1.00: 145226112 sectors, multi 0: LBA48 
[    2.652682] ata1.00: applying bridge limits
[    2.657505] ata1.00: configured for UDMA/100
[    2.657726] scsi 0:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 21.0 PQ: 0 ANSI: 5
[    2.657912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.657975] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
[    2.658022] sd 0:0:0:0: [sda] Write Protect is off
[    2.658026] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.658040] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.668293]  sda: sda1
[    2.668751] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.738901] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    2.758897] Refined TSC clocksource calibration: 2673.299 MHz.
[    2.758906] Switching to clocksource tsc
[    2.998938] ata2: SATA link down (SStatus 0 SControl 300)
[    3.348899] ata3: SATA link down (SStatus 0 SControl 300)
[    3.468821] usb 5-2: new low speed USB device using uhci_hcd and address 3
[    3.672073] input: Razer Razer Diamondback 3G as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
[    3.672181] generic-usb 0003:1532:000D.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamondback 3G] on usb-0000:00:1a.2-1/input0
[    3.738927] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input3
[    3.739012] generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1a.2-2/input0
[    3.739032] usbcore: registered new interface driver usbhid
[    3.739036] usbhid: USB HID core driver
[    3.928749] usb 8-1: new low speed USB device using uhci_hcd and address 2
[    4.108661] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.114480] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[    4.114485] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    4.120387] ata4.00: configured for UDMA/133
[    4.120557] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
[    4.120725] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    4.120768] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.120811] sd 3:0:0:0: [sdb] Write Protect is off
[    4.120815] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.120828] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.131002]  sdb: sdb1 sdb2
[    4.131597] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.198869] input: Ideazon Zboard USB Gaming Device as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
[    4.198958] generic-usb 0003:1038:0310.0003: input,hidraw2: USB HID v1.11 Keyboard [Ideazon Zboard USB Gaming Device] on usb-0000:00:1d.2-1/input0
[    4.229586] input: Ideazon Zboard USB Gaming Device as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input5
[    4.229757] generic-usb 0003:1038:0310.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Ideazon Zboard USB Gaming Device] on usb-0000:00:1d.2-1/input1
[    4.468758] ata5: SATA link down (SStatus 0 SControl 300)
[    4.818719] ata6: SATA link down (SStatus 0 SControl 300)
[    4.938673] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    4.938678] EXT4-fs (sda1): write access will be enabled during recovery
[    6.813743] EXT4-fs (sda1): recovery complete
[    6.823439] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   22.837411] <30>udev[323]: starting version 167
[   22.848042] lp: driver loaded but no devices found
[   22.852104] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[   22.867020] EDAC MC: Ver: 2.1.0 Apr 11 2011
[   22.869118] EDAC i7core: Driver loaded.
[   22.883863] nvidia: module license 'NVIDIA' taints kernel.
[   22.883867] Disabling lock debugging due to kernel taint
[   22.965921] type=1400 audit(1303578103.345:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=486 comm="apparmor_parser"
[   22.966575] type=1400 audit(1303578103.355:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser"
[   22.966988] type=1400 audit(1303578103.355:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser"
[   22.970554] coretemp coretemp.0: TjMax is 100 C.
[   22.970685] coretemp coretemp.1: TjMax is 100 C.
[   22.970803] coretemp coretemp.2: TjMax is 100 C.
[   22.970894] coretemp coretemp.3: TjMax is 100 C.
[   22.973769] it87: Found IT8720F chip at 0x290, revision 5
[   22.973803] ACPI: resource it87 [io  0x0295-0x0296] conflicts with ACPI region IP__ [io 0x295-0x296]
[   22.973805] ACPI: This conflict may cause random problems and system instability
[   22.973806] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.981370] type=1400 audit(1303578103.365:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=551 comm="apparmor_parser"
[   22.982010] type=1400 audit(1303578103.365:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=551 comm="apparmor_parser"
[   22.982425] type=1400 audit(1303578103.365:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=551 comm="apparmor_parser"
[   22.992866] r8169 0000:03:00.0: eth0: link down
[   22.992872] r8169 0000:03:00.0: eth0: link down
[   22.993863] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.000206] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   23.000258] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   23.000281] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   23.087263] hda_codec: ALC888: BIOS auto-probing.
[   23.095157] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   23.253967] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.253974] nvidia 0000:01:00.0: setting latency timer to 64
[   23.253978] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   23.253980] vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:02:00.0
[   23.254203] nvidia 0000:02:00.0: enabling device (0000 -> 0003)
[   23.254206] nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.254210] nvidia 0000:02:00.0: setting latency timer to 64
[   23.254215] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[   23.254425] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  270.41.06  Mon Apr 18 14:53:56 PDT 2011
[   23.255236] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   23.338140] type=1400 audit(1303578103.725:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=749 comm="apparmor_parser"
[   23.338150] type=1400 audit(1303578103.725:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=748 comm="apparmor_parser"
[   23.338664] type=1400 audit(1303578103.725:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=749 comm="apparmor_parser"
[   23.338980] type=1400 audit(1303578103.725:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=750 comm="apparmor_parser"
[   23.675943] vesafb: framebuffer at 0xd9000000, mapped to 0xffffc90012500000, using 1216k, total 1216k
[   23.675946] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   23.675948] vesafb: scrolling: redraw
[   23.675949] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   23.676081] Console: switching to colour frame buffer device 80x30
[   23.693505] ppdev: user-space parallel port driver
[   23.719398] fb0: VESA VGA frame buffer device
[   23.985703] ioremap error for 0x8f7e3000-0x8f7e4000, requested 0x10, got 0x0
[   24.900010] r8169 0000:03:00.0: eth0: link up
[   24.900795] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.762555] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   26.380782] Loading iSCSI transport class v2.0-870.
[   26.391686] iscsi: registered transport (tcp)
[   26.422387] iscsi: registered transport (iser)
[   26.424983] iscsid (1354): /proc/1354/oom_adj is deprecated, please use /proc/1354/oom_score_adj instead.
[   27.158187] WARNING! power/level is deprecated; use power/control instead
[   28.639511] r8169 0000:03:00.0: eth0: link down
[   29.460641] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   30.394114] r8169 0000:03:00.0: eth0: link up
[   35.574801] eth0: no IPv6 routers present
[ 3697.336204] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3697.336897] SGI XFS Quota Management subsystem
[ 3697.354483] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3697.466920] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 3697.520201] QNX4 filesystem 0.2.3 registered.
[ 3697.593740] Btrfs loaded
[ 5701.634847] coretemp coretemp.4: TjMax is 100 C.
[ 5701.974903] CPU 1 is now offline
[ 5701.975964] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5
[ 5701.976688] coretemp coretemp.6: TjMax is 100 C.
[ 5702.136469] CPU 2 is now offline
[ 5702.137509] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5
[ 5702.137837] coretemp coretemp.5: TjMax is 100 C.
[ 5702.404942] CPU 3 is now offline
[ 5702.406217] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5
[ 5702.545271] Broke affinity for irq 16
[ 5702.654801] CPU 4 is now offline
[ 5702.894772] CPU 5 is now offline
[ 5703.084713] CPU 6 is now offline
[ 5703.264678] CPU 7 is now offline
[ 5703.264682] SMP alternatives: switching to UP code
[ 5703.420066] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 5979.775765] SMP alternatives: switching to SMP code
[ 5979.780243] Booting Node 0 Processor 1 APIC 0x4
[ 5979.964411] coretemp coretemp.1: TjMax is 100 C.
[ 5979.970523] Switched to NOHz mode on CPU #1
[ 5979.971124] Booting Node 0 Processor 2 APIC 0x2
[ 5980.160586] Switched to NOHz mode on CPU #2
[ 5980.251207] coretemp coretemp.2: TjMax is 100 C.
[ 5980.261377] Booting Node 0 Processor 3 APIC 0x6
[ 5980.442105] coretemp coretemp.3: TjMax is 100 C.
[ 5980.450585] Switched to NOHz mode on CPU #3
[ 5980.451584] Booting Node 0 Processor 4 APIC 0x5
[ 5980.640547] Switched to NOHz mode on CPU #4
[ 5980.641242] Booting Node 0 Processor 5 APIC 0x7
[ 5980.830592] Switched to NOHz mode on CPU #5
[ 5980.931358] Booting Node 0 Processor 6 APIC 0x3
[ 5981.120478] Switched to NOHz mode on CPU #6
[ 5981.121023] Booting Node 0 Processor 7 APIC 0x1
[ 5981.310475] Switched to NOHz mode on CPU #7
[ 5981.423243] r8169 0000:03:00.0: eth0: link down
[ 5981.603305] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 5983.317279] r8169 0000:03:00.0: eth0: link up
[ 6114.327613] r8169 0000:03:00.0: eth0: link down
[ 6114.582461] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 6115.961909] r8169 0000:03:00.0: eth0: link up
[ 6117.142551] PM: Syncing filesystems ... done.
[ 6117.148337] PM: Preparing system for mem sleep
[ 6117.148350] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6117.163745] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 6117.183773] PM: Entering mem sleep
[ 6117.183821] Suspending console(s) (use no_console_suspend to debug)
[ 6117.184129] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[ 6117.184197] sd 3:0:0:0: [sdb] Stopping disk
[ 6117.184305] serial 00:07: disabled
[ 6117.184927] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6117.186108] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 6117.186121] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 6117.186171] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 6117.186193] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 6117.186209] r8169 0000:03:00.0: eth0: link down
[ 6117.213575] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 6117.213603] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 6117.213643] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 6117.213716] uhci_hcd 0000:00:1a.2: PCI INT D disabled
[ 6117.293833] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 6117.299708] sd 0:0:0:0: [sda] Stopping disk
[ 6117.313689] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 127.574 msecs
[ 6117.462518] PM: suspend of drv:sd dev:0:0:0:0 complete after 277.627 msecs
[ 6117.462534] PM: suspend of drv:scsi dev:target0:0:0 complete after 277.532 msecs
[ 6117.462547] PM: suspend of drv:scsi dev:host0 complete after 277.228 msecs
[ 6118.104708] PM: suspend of drv:sd dev:3:0:0:0 complete after 920.695 msecs
[ 6118.104782] PM: suspend of drv:scsi dev:target3:0:0 complete after 920.552 msecs
[ 6118.104808] PM: suspend of drv:scsi dev:host3 complete after 919.730 msecs
[ 6118.123510] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 937.569 msecs
[ 6118.123526] PM: suspend of drv: dev:pci0000:00 complete after 937.402 msecs
[ 6118.123583] PM: suspend of devices complete after 939.692 msecs
[ 6118.123586] PM: suspend devices took 0.940 seconds
[ 6118.123737] r8169 0000:03:00.0: PME# enabled
[ 6118.123747] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[ 6118.183615] PM: late suspend of devices complete after 60.032 msecs
[ 6118.184077] ACPI: Preparing to enter system sleep state S3
[ 6118.184470] PM: Saving platform NVS memory
[ 6118.185015] Disabling non-boot CPUs ...
[ 6118.313408] CPU 1 is now offline
[ 6118.553377] CPU 2 is now offline
[ 6118.823360] CPU 3 is now offline
[ 6119.103307] CPU 4 is now offline
[ 6119.373281] CPU 5 is now offline
[ 6119.643240] CPU 6 is now offline
[ 6119.763224] CPU 7 is now offline
[ 6119.763867] Back to C!
[ 6119.763869] PM: Restoring platform NVS memory
[ 6119.764258] Enabling non-boot CPUs ...
[ 6119.764344] Booting Node 0 Processor 1 APIC 0x4
[ 6119.953869] Switched to NOHz mode on CPU #1
[ 6119.953924] CPU1 is up
[ 6119.954056] Booting Node 0 Processor 2 APIC 0x2
[ 6120.143842] Switched to NOHz mode on CPU #2
[ 6120.203876] CPU2 is up
[ 6120.203968] Booting Node 0 Processor 3 APIC 0x6
[ 6120.393812] Switched to NOHz mode on CPU #3
[ 6120.443852] CPU3 is up
[ 6120.443941] Booting Node 0 Processor 4 APIC 0x5
[ 6120.633849] Switched to NOHz mode on CPU #4
[ 6120.683915] CPU4 is up
[ 6120.684049] Booting Node 0 Processor 5 APIC 0x7
[ 6120.873879] Switched to NOHz mode on CPU #5
[ 6120.934132] CPU5 is up
[ 6120.934273] Booting Node 0 Processor 6 APIC 0x3
[ 6121.123915] Switched to NOHz mode on CPU #6
[ 6121.184072] CPU6 is up
[ 6121.184589] Booting Node 0 Processor 7 APIC 0x1
[ 6121.373878] Switched to NOHz mode on CPU #7
[ 6121.444076] CPU7 is up
[ 6121.447864] ACPI: Waking up from system sleep state S3
[ 6121.448100] pcieport 0000:00:07.0: restoring config space at offset 0x7 (was 0x2000d0d0, writing 0xd0d0)
[ 6121.448135] i7core_edac 0000:00:14.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 6121.448158] pci 0000:00:14.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 6121.448181] pci 0000:00:14.2: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 6121.448197] pci 0000:00:14.3: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 6121.463829] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xf3ffe000-0xf3ffe3ff] (PCI address [0xf3ffe000-0xf3ffe3ff])
[ 6121.463846] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30f)
[ 6121.463867] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 6121.483826] HDA Intel 0000:00:1b.0: BAR 0: set to [mem 0xf3ff4000-0xf3ff7fff 64bit] (PCI address [0xf3ff4000-0xf3ff7fff])
[ 6121.483842] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 6121.483859] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 6121.483864] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[ 6121.483903] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 6121.503848] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xf3ffd000-0xf3ffd3ff] (PCI address [0xf3ffd000-0xf3ffd3ff])
[ 6121.503866] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10e)
[ 6121.503889] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 6121.503919] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 6121.503927] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100005)
[ 6121.503976] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x100, writing 0x10f)
[ 6121.503989] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[ 6121.504022] i801_smbus 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800003)
[ 6121.504037] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xdbfe0000, writing 0x0)
[ 6121.504045] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[ 6121.504070] nvidia 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 6121.504076] nvidia 0000:02:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xdf01)
[ 6121.504084] nvidia 0000:02:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100007)
[ 6121.504115] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 6121.504128] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf3df000c)
[ 6121.504133] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf3eff004)
[ 6121.504139] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xbe01)
[ 6121.504143] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 6121.504148] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 6121.504259] PM: early resume of devices complete after 56.264 msecs
[ 6121.504404] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6121.504410] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6121.504430] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 6121.504435] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 6121.504457] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6121.504462] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 6121.504481] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6121.504486] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 6121.504526] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6121.504531] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6121.504570] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 6121.504575] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6121.504581] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6121.504603] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6121.504609] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6121.504611] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6121.504615] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6121.504640] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6121.504642] pci 0000:00:1e.0: setting latency timer to 64
[ 6121.504646] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6121.504663] ahci 0000:00:1f.2: setting latency timer to 64
[ 6121.504683] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[ 6121.504689] r8169 0000:03:00.0: PME# disabled
[ 6121.506926] sd 0:0:0:0: [sda] Starting disk
[ 6121.507478] sd 3:0:0:0: [sdb] Starting disk
[ 6121.509528] serial 00:07: activated
[ 6121.543828] r8169 0000:03:00.0: eth0: link down
[ 6121.636958] PM: resume of drv:usb dev:5-1 complete after 129.829 msecs
[ 6121.637038] PM: resume of drv:usbhid dev:5-1:1.0 complete after 129.794 msecs
[ 6121.637041] PM: resume of drv: dev:ep_00 complete after 129.737 msecs
[ 6121.637047] PM: resume of drv: dev:ep_81 complete after 129.775 msecs
[ 6121.638997] PM: resume of drv:usb dev:5-2 complete after 131.667 msecs
[ 6121.639006] PM: resume of drv:usbhid dev:5-2:1.0 complete after 131.653 msecs
[ 6121.639015] PM: resume of drv: dev:ep_81 complete after 131.640 msecs
[ 6121.639018] PM: resume of drv: dev:ep_00 complete after 131.620 msecs
[ 6121.639020] PM: resume of drv:usb dev:8-1 complete after 131.599 msecs
[ 6121.639028] PM: resume of drv:usbhid dev:8-1:1.0 complete after 131.584 msecs
[ 6121.639038] PM: resume of drv:usbhid dev:8-1:1.1 complete after 131.482 msecs
[ 6121.639041] PM: resume of drv: dev:ep_00 complete after 131.457 msecs
[ 6121.639045] PM: resume of drv: dev:ep_82 complete after 131.477 msecs
[ 6121.639083] PM: resume of drv: dev:ep_81 complete after 131.538 msecs
[ 6121.853826] ata2: SATA link down (SStatus 0 SControl 300)
[ 6121.893826] ata3: SATA link down (SStatus 0 SControl 300)
[ 6121.913832] ata5: SATA link down (SStatus 0 SControl 300)
[ 6121.953743] ata6: SATA link down (SStatus 0 SControl 300)
[ 6122.445911] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 941.371 msecs
[ 6122.491149] PM: resume of drv:nvidia dev:0000:02:00.0 complete after 986.610 msecs
[ 6123.300242] r8169 0000:03:00.0: eth0: link up
[ 6125.713368] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6125.721926] ata1.00: configured for UDMA/100
[ 6125.746755] PM: resume of drv:sd dev:0:0:0:0 complete after 4240.353 msecs
[ 6125.746842] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 4240.360 msecs
[ 6125.746847] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 4237.526 msecs
[ 6126.973202] ata4: link is slow to respond, please be patient (ready=0)
[ 6127.693052] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6127.704754] ata4.00: configured for UDMA/133
[ 6127.726650] PM: resume of drv:sd dev:3:0:0:0 complete after 6219.938 msecs
[ 6127.726735] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 6219.962 msecs
[ 6127.726741] PM: resume of drv:scsi_disk dev:3:0:0:0 complete after 1980.079 msecs
[ 6127.726821] PM: resume of devices complete after 6223.305 msecs
[ 6127.726983] PM: resume devices took 6.220 seconds
[ 6127.727012] PM: Finishing wakeup.
[ 6127.727013] Restarting tasks ... done.
[ 6128.316938] r8169 0000:03:00.0: eth0: link down
[ 6128.519684] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 6130.083848] r8169 0000:03:00.0: eth0: link up
[ 6132.908533] NVRM: Xid (0000:01:00): 13, 0003 00000000 00005097 00001514 00000000 00000040
[ 6132.985412] NVRM: Xid (0000:01:00): 13, 0003 00000000 00005097 00001514 00000000 00000040
[ 6133.464879] NVRM: Xid (0000:01:00): 13, 0003 00000000 00005097 00001514 00000000 00000040
[ 6133.519308] NVRM: Xid (0000:01:00): 13, 0003 00000000 00005097 00001514 00000000 00000040
[ 6134.464889] NVRM: Xid (0000:01:00): 13, 0003 00000000 00005097 00001514 00000000 00000040
[ 6135.453163] NVRM: Xid (0000:01:00): 13, 0003 00000000 00005097 00001514 00000000 00000040
[ 6136.229362] NVRM: Xid (0000:01:00): 13, 0003 00000000 00005097 00001514 00000000 00000040
[ 6136.319242] NVRM: Xid (0000:01:00): 13, 0003 00000000 00005097 00001514 00000000 00000040
gert is offline   Reply With Quote