View Single Post
Old 08-09-11, 06:32 PM   #15
Vorgus
Registered User
 
Vorgus's Avatar
 
Join Date: Dec 2008
Posts: 107
Default Re: 560 can't do physx?

Found the config file and manually changed it to the native mode for this monitor and BF now runs. Rolling the drivers back to 270.61 fixed the static lines in hulu playback. But FluidMark still crashes after just a few seconds of run. I get the popup that the driver had stopped but recovered. I also get a popup box pointing to http://www.nvidia.com/page/support.html with "error code 4". But trying to do a search at that page for that error seem to come up with a lot of random stuff. Looking in the folder I did find one log that might have something. It doesn't make this log every time so it took a few runs to see it:


Code:
memory_failure_log.txt
GpuHeapMalloc failure of shapeImpulseOrNormalArray in file 'd:\sw\physx\physxsdk\2.8.4\trunk\lowlevel\gpu\common\include\PxgFluidParticleCollisionData.h' in line 119.
This log was also created for that run:

Code:
FluidMark_0001.log
<->[NORMAL]#00000001#Tue Aug 09 15:06:20 2011#FluidMark 1.3.1 startup...
<->[NORMAL]#00000002#Tue Aug 09 15:06:20 2011## of logical CPU processors: 4
<->[NORMAL]#00000003#Tue Aug 09 15:06:20 2011#Detected graphics cards and GPUs:
<->[NORMAL]#00000004#Tue Aug 09 15:06:20 2011#- GPU 1:  GeForce GTX 560 Ti
<->[NORMAL]#00000005#Tue Aug 09 15:06:20 2011#----> GPU temperature: 57.000C
<->[NORMAL]#00000006#Tue Aug 09 15:06:20 2011#----> Graphics driver: 8.17.12.7061
<->[NORMAL]#00000007#Tue Aug 09 15:06:20 2011#Main OpenGL renderer: NVIDIA GeForce GTX 560 Ti 
<->[NORMAL]#00000008#Tue Aug 09 15:06:20 2011#OpenGL version detected: 4.1
<->[NORMAL]#00000009#Tue Aug 09 15:06:20 2011#Device ID string: PCI\VEN_10DE&DEV_1200&SUBSYS_15613842&REV_A1
<->[NORMAL]#00000010#Tue Aug 09 15:06:20 2011#Graphics drivers: 8.17.12.7061 (4-7-2011) - nvoglv64
<->[NORMAL]#00000011#Tue Aug 09 15:06:20 2011#CPU: AMD Phenom(tm) II X4 945 Processor
<->[NORMAL]#00000012#Tue Aug 09 15:06:21 2011#CPU speed: 3000 MHz
<->[NORMAL]#00000013#Tue Aug 09 15:06:21 2011#System memory: 8191 MB
<->[NORMAL]#00000014#Tue Aug 09 15:06:21 2011#OS: Windows 7 64-bit build 7601 [Service Pack 1]
<->[NORMAL]#00000015#Tue Aug 09 15:06:21 2011#oZone3D Engine is starting up - kernel build: [v3.2.13 - Nov 12 2010 @ 13:50:06] - codename: Agerothgar
<->[NORMAL]#00000016#Tue Aug 09 15:06:21 2011#oZone3D initialization in progress...
<->[NORMAL]#00000017#Tue Aug 09 15:06:21 2011#oZone3D - OpenGL renderer creation ok.
<->[NORMAL]#00000018#Tue Aug 09 15:06:21 2011#o3RendererOpenGL INFO: OpenGL version: 4.1.0
<->[NORMAL]#00000019#Tue Aug 09 15:06:21 2011#o3RendererOpenGL INFO: OpenGL Shading Language (GLSL) version: 4.10 NVIDIA via Cg compiler
<->[NORMAL]#00000020#Tue Aug 09 15:06:21 2011#oZone3D initialization ok.
<->[NORMAL]#00000021#Tue Aug 09 15:06:32 2011#NVIDIA PhysX engine version 2.8.4 successfully started.
<->[NORMAL]#00000022#Tue Aug 09 15:06:32 2011#NVIDIA PhysX engine - # of PPUs detected: 1
<->[NORMAL]#00000023#Tue Aug 09 15:06:32 2011#NVIDIA PhysX: PhysX hardware detected.
<->[NORMAL]#00000024#Tue Aug 09 15:06:32 2011#NVIDIA PhysX startup ok.


The following run didn't create the memory error log, and this other log was a bit different:

Code:
FluidMark_0001.log
<->[NORMAL]#00000001#Tue Aug 09 15:14:55 2011#FluidMark 1.3.1 startup...
<->[NORMAL]#00000002#Tue Aug 09 15:14:55 2011## of logical CPU processors: 4
<->[NORMAL]#00000003#Tue Aug 09 15:14:55 2011#Detected graphics cards and GPUs:
<->[NORMAL]#00000004#Tue Aug 09 15:14:55 2011#- GPU 1:  GeForce GTX 560 Ti
<->[NORMAL]#00000005#Tue Aug 09 15:14:55 2011#----> GPU temperature: 57.000C
<->[NORMAL]#00000006#Tue Aug 09 15:14:55 2011#----> Graphics driver: 8.17.12.7061
<->[NORMAL]#00000007#Tue Aug 09 15:14:55 2011#Main OpenGL renderer: NVIDIA GeForce GTX 560 Ti 
<->[NORMAL]#00000008#Tue Aug 09 15:14:55 2011#OpenGL version detected: 4.1
<->[NORMAL]#00000009#Tue Aug 09 15:14:55 2011#Device ID string: PCI\VEN_10DE&DEV_1200&SUBSYS_15613842&REV_A1
<->[NORMAL]#00000010#Tue Aug 09 15:14:55 2011#Graphics drivers: 8.17.12.7061 (4-7-2011) - nvoglv64
<->[NORMAL]#00000011#Tue Aug 09 15:14:55 2011#CPU: AMD Phenom(tm) II X4 945 Processor
<->[NORMAL]#00000012#Tue Aug 09 15:14:56 2011#CPU speed: 3000 MHz
<->[NORMAL]#00000013#Tue Aug 09 15:14:56 2011#System memory: 8191 MB
<->[NORMAL]#00000014#Tue Aug 09 15:14:56 2011#OS: Windows 7 64-bit build 7601 [Service Pack 1]
<->[NORMAL]#00000015#Tue Aug 09 15:14:56 2011#oZone3D Engine is starting up - kernel build: [v3.2.13 - Nov 12 2010 @ 13:50:06] - codename: Agerothgar
<->[NORMAL]#00000016#Tue Aug 09 15:14:56 2011#oZone3D initialization in progress...
<->[NORMAL]#00000017#Tue Aug 09 15:14:56 2011#oZone3D - OpenGL renderer creation ok.
<->[NORMAL]#00000018#Tue Aug 09 15:14:56 2011#o3RendererOpenGL INFO: OpenGL version: 4.1.0
<->[NORMAL]#00000019#Tue Aug 09 15:14:56 2011#o3RendererOpenGL INFO: OpenGL Shading Language (GLSL) version: 4.10 NVIDIA via Cg compiler
<->[NORMAL]#00000020#Tue Aug 09 15:14:56 2011#oZone3D initialization ok.
<->[NORMAL]#00000021#Tue Aug 09 15:15:30 2011#NVIDIA PhysX engine version 2.8.4 successfully started.
<->[NORMAL]#00000022#Tue Aug 09 15:15:30 2011#NVIDIA PhysX engine - # of PPUs detected: 1
<->[NORMAL]#00000023#Tue Aug 09 15:15:30 2011#NVIDIA PhysX: PhysX hardware detected.
<->[NORMAL]#00000024#Tue Aug 09 15:15:30 2011#NVIDIA PhysX startup ok.
<->[NORMAL]#00000025#Tue Aug 09 15:15:43 2011#PhysX - WARM-UP over - staring benchmarking stats...
Vorgus is offline   Reply With Quote