View Single Post
Old 09-21-11, 04:16 PM   #2
DeiF
Registered User
 
Join Date: Oct 2008
Posts: 114
Default Re: No sound through HDMI with GT440

Things got a little better since I added "probe_mask=8" to the snd-hda-intel module options:
Code:
options snd-hda-intel enable_msi=0 bdl_pos_adj=0x00ff probe_mask=8
Now "cat /proc/asound/card0/eld#3.0 gives me:
Code:
monitor_present         1
eld_valid               1
monitor_name            HG216
      
connection_type         HDMI
eld_version             [0x2] CEA-861D or below
edid_version            [0x3] CEA-861-B, C or D
manufacture_id          0x6422
product_id              0x1ca3
port_id                 0x20000
support_hdcp            0
support_ai              0
audio_sync_delay        0
speakers                [0x1] FL/FR
sad_count               1
sad0_coding_type        [0x1] LPCM
sad0_channels           2
sad0_rates              [0xe0] 44100 48000 88200
sad0_bits               [0x20000] 16
But still no sound.

I ran "alsamixer -c 0" and made sure outputs were not muted.
But "speaker-test -D hw:0,3" and "aplay -D hw:0,3 file.wav" give no sound.
(also tried "aplay -D hdmi:0,0 file.wav")

Code:
aplay -D hw:0,3 /usr/share/sounds/KDE-Im-Phone-Ring.wav 
Playing WAVE '/usr/share/sounds/KDE-Im-Phone-Ring.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
aplay: pcm_write:1682: write error: Error de entrada/salida
Attached new nvidia-bug-report.log.gz.
Attached Files
File Type: gz nvidia-bug-report.log.gz (65.0 KB, 65 views)

Last edited by DeiF; 09-21-11 at 04:43 PM. Reason: added ouput of aplay command
DeiF is offline   Reply With Quote