Thread: TNT2 64 problem
View Single Post
Old 12-20-03, 03:34 PM   #3
Orkus
Registered User
 
Join Date: Dec 2003
Posts: 2
Default

[quote]Originally posted by Paul E
[b](EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"


The Faq is your friend ;-)

Q: My X server fails to start, and my XFree86 log file contains the error:

"(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!"

A: Nothing will work if the NVIDIA kernel module doesn't function
properly. If you see anything in the X log file like "(EE)
NVIDIA(0): Failed to initialize the NVIDIA kernel module!" then
there is most likely a problem with the NVIDIA kernel module.
First, you should verify that if you installed from rpm that
the rpm was built specifically for the kernel you are using.
You should also check that the module is loaded ('/sbin/lsmod');
if it is not loaded try loading it explicitly with 'insmod' or
'modprobe' (be sure to exit the X server before installing a new
kernel module). If you receive errors about unresolved symbols,
then the kernel module has most likely been built using header files
for a different kernel revision than what you are running. You can
explicitly control what kernel header files are used when building
the NVIDIA kernel module with the --kernel-include-dir option (see
`sh NVIDIA-Linux-x86-1.0-4496-pkg1.run --advanced-options`
for details).

OK, I read the FAQ. And still I don't get the point:
1) I did not install via RPM (I use slackware)
2) I loaded the module manually: same outcome, XFree86 does not start.
3) using header files... What to do, then? I am not very familiar with kernel tampering!!!! where do I have to look?
Orkus is offline   Reply With Quote