has released the 2012 version "3-in-1" interface 30-pin connector for iOS devices. Instead of swapping out the USB and SD card slot with Apple’s camera connection kit, this new adapter puts it all together.
Importing photos and videos, using an SD card or the USB cable for your digital camera
-SD and TF card reader: Download photos directly from your camera’s TF/SD card: insert your digital camera’s TF/SD card into the slot and then connect it to your iPad
-USB port: just attach your digital camera or iPhone using a USB cable (not included), and then plug it into the dock connector port on your iPad
The differences between this updated iPad camera connection kit and the old version
● more convenient
Remember the old version of the 3-in-1 iPad camera connection kit? You are definitely bothered by the “switch” on the left side. You have to turn right or left to read SD or USB card. But really, who wants to carry coals to Newcastle? Here, this new kit, is a single dock connecting apparatus with a trifecta of ports: USB, SD and TF card. You can offload photos from your camera onto your iPad via a direct USB connection, SD card TF card
Apparently, you can see a crack in the old version. it is fragile and undurable. Our new connector, perfectly slick and no crack, bear falling and water-resistant. This new adapter was dropped 100 times on a flat concrete surface from 6″/1.8m to check how well the rigid frame protects against drops.
Compared to the plastic old vesion adapter, the port pins of new version are tougher, not easy to bend so that to prolong the lifetime of the products
● Weight and Size
The old version weight is 45g; size is 5 x 5 x 1.5cm.The new version weight is 30g. Size is 3.7 x 5 x 1.1cm
The new kit adopts original apple chip. The reading speed is faster than the old version 4 times.