I've been running my i7 960 @ 3.8 GHz for a long time now with no problems, using the following memory;
But recently I've decided to upgrade my memory and I bought these;
I'm a little confused on how I should change the bios in order to continue having my current OC with the new memory.
My current memory settings in the bios are:
Memory SPD - Standard
Memory Control Setting - Enabled
Memory Frequency - 1333MHz / 2:10
Target Memory Frequency - 1603MHz
Channel Interleave Setting - 6 Way
Rank Interleave Setting - 4 Way
Memory Low Gap - Auto
tCL Setting - 7
tRCD Setting - 7
tRP Setting - 7
tRAS Setting - 20
tRFC Setting - 88
tREF Setting - Auto
Command Rate - 1T
Then everything else is AUTO.
Do I change the current timings to the new memory timings, and anything else? Since the new memory is 2000MHz and not 1600, I'm a little confused on how I should do this.
Please help me out.